AutoCodes – Ford – B2691 Ford

B2691 Ford Code - Left Seat Belt Switch Circuit Fault

Quick Answer

The Restraints Control Module (RCM) checks the Left Seat Belt Buckle Switch for faults. Common causes include Faulty Left Seat Belt Buckle Switch, Left Seat Belt Buckle Switch harness is open or shorted, Left Seat Belt Buckle Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2691 Ford indicates Left Seat Belt Switch Circuit Fault.
Common causes: Common causes include Faulty Left Seat Belt Buckle Switch, Left Seat Belt Buckle Switch harness is open or shorted, Left Seat Belt Buckle Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,570

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2691 Ford Description

The Restraints Control Module (RCM) checks the Left Seat Belt Buckle Switch for faults. If the RCM detects an open circuit or short to battery fault, it will store DTC B2691 in memory and flash Code 51 on AIR BAG warning light.

OBDII Code B2691 Ford - Left Seat Belt Switch Circuit Fault - AutoCodes.com — B2691 Ford Code - Left Seat Belt Switch Circuit Fault

What does this mean?

What are the Possible Causes of the DTC B2691 Ford?

Faulty Left Seat Belt Buckle Switch
Left Seat Belt Buckle Switch harness is open or shorted
Left Seat Belt Buckle Switch circuit poor electrical connection
Faulty Restraints Control Module (RCM)

How to Fix the DTC B2691 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2691 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2691 Ford code?

Need more information on how to fix the B2691 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2691 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2691 Ford Code

1. What does the OBDII code B2691 mean on a Ford vehicle?

B2691 indicates a fault in the left seat belt switch circuit, meaning the system has detected an issue with the electrical circuit responsible for monitoring the seat belt status.

2. What are the common symptoms of the B2691 code?

Symptoms may include the seat belt warning light staying on, audible chimes even when the seat belt is fastened, or inconsistent detection of the seat belt being buckled.

3. What causes the B2691 code to appear?

The code can be caused by a faulty seat belt switch, damaged wiring or connectors in the circuit, or corrosion at the seat belt switch terminals.

4. Can I drive with the B2691 code active?

Yes, but itâ€™s not recommended to ignore the code, as it may affect the seat belt warning system, which is crucial for safety.

5. How do I diagnose the B2691 code?

Diagnosis typically involves checking the seat belt switch for proper operation, inspecting the wiring and connectors for damage or corrosion, and using a multimeter to test the circuit's continuity.

6. What repairs are needed to fix the B2691 code?

Repairs may include replacing the seat belt switch, repairing or replacing damaged wiring, or cleaning corroded connectors.

7. How much does it cost to fix the B2691 code on a Ford?

The cost depends on the exact repair needed. Replacing a seat belt switch typically costs $100-$200, while wiring repairs can vary depending on the extent of the damage.

8. Can a faulty seat belt switch trigger other codes besides B2691?

Yes, a faulty seat belt switch could potentially trigger other codes related to the restraint or occupant detection system.

9. Will clearing the B2691 code fix the problem?

Clearing the code will reset the system temporarily, but if the underlying issue isnâ€™t fixed, the code will reappear.

10. Can I fix the B2691 code myself?

If youâ€™re comfortable with basic electrical repairs, you can inspect and replace the seat belt switch or repair damaged wiring. Otherwise, itâ€™s best to take the vehicle to a professional.