AutoCodes – Mercury – B2661 Mercury

B2661 Mercury Code - Parklamp Relay Output Short to Battery

Quick Answer

The Vehicle Security Module monitors the Parklamp Relay. Common causes include Faulty Parklamp Relay, Parklamp Relay harness is open or shorted, Parklamp Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2661 Mercury indicates Parklamp Relay Output Short to Battery.
Common causes: Common causes include Faulty Parklamp Relay, Parklamp Relay harness is open or shorted, Parklamp Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 502

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2661 Mercury Description

The Vehicle Security Module monitors the Parklamp Relay. The Vehicle Security Module sets the OBDII code when the Parklamp Relay is not to factory specifications.

OBDII Code B2661 Mercury - Parklamp Relay Output Short to Battery - AutoCodes.com — B2661 Mercury Code - Parklamp Relay Output Short to Battery

What does this mean?

What are the Possible Causes of the DTC B2661 Mercury?

Faulty Parklamp Relay
Parklamp Relay harness is open or shorted
Parklamp Relay circuit poor electrical connection
Faulty Vehicle Security Module

How to Fix the DTC B2661 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2661 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2661 Mercury code?

Need more information on how to fix the B2661 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2661 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2661 Mercury Code

1. What are the common symptoms of OBDII code B2661 in a Mercury related to the Parklamp Relay Output Short to Battery?

- Common symptoms include park lamps staying on continuously, draining the battery, and potential flickering of the park lights.

2. What are the possible causes of the OBDII code B2661 in a Mercury indicating a Parklamp Relay Output Short to Battery?

- The code could be triggered by a short circuit in the wiring related to the park lamp relay, a faulty park lamp relay, or a malfunction in the lighting control module.

3. How can I diagnose the issue associated with OBDII code B2661 in my Mercury regarding the Parklamp Relay Output Short to Battery?

- To diagnose the problem, you can start by checking the wiring harness for any visible damage, testing the park lamp relay, and inspecting the lighting control module for any signs of malfunction.

4. What steps can I take to repair OBDII code B2661 in my Mercury due to the Parklamp Relay Output Short to Battery?

- Repair steps may include repairing or replacing damaged wiring, replacing the faulty park lamp relay, or addressing any issues with the lighting control module as needed.

5. Can I reset the OBDII code B2661 in my Mercury related to the Parklamp Relay Output Short to Battery on my own?

- You can clear the code using an OBDII scanner, but it is important to address the underlying issue causing the code to prevent it from reoccurring.

6. Are there any safety concerns associated with OBDII code B2661 in a Mercury indicating a Parklamp Relay Output Short to Battery?

- While the code itself may not pose immediate safety risks, continuous operation of park lamps can drain the battery and potentially cause visibility issues for other drivers on the road.

7. Is it safe to continue driving my Mercury with the OBDII code B2661 related to the Parklamp Relay Output Short to Battery?

- It is not recommended to drive the vehicle with this issue unresolved, as it can lead to battery drainage and other electrical problems in the vehicle.

8. Can extreme weather conditions affect the likelihood of encountering OBDII code B2661 in a Mercury due to the Parklamp Relay Output Short to Battery?

- Extreme weather conditions, such as heavy rain or snow, can potentially exacerbate electrical issues in the vehicle, increasing the chances of encountering this code.

9. How long does it typically take to repair OBDII code B2661 in a Mercury associated with the Parklamp Relay Output Short to Battery?

- The repair time can vary depending on the exact cause of the issue, but it may take anywhere from a few hours to a full day to diagnose and fix the problem.

10. Is it possible for a DIY enthusiast to address OBDII code B2661 in a Mercury related to the Parklamp Relay Output Short to Battery?

- While some individuals with experience in automotive repair may be able to address this issue on their own, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the problem is resolved correctly.