B2653 2018 Toyota RAV4 Code - Lifter Sensor Malfunction
Quick Answer
When the Position Control ECU and Switch Assembly does not receive a sensor signal despite upward or downward movement of the seat by power seat motor operation, this Diagnostic Trouble Code (DTC) is stored. Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2653 2018 Toyota RAV4 indicates Lifter Sensor Malfunction.
- Common causes
- Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2653 2018 Toyota RAV4 Description
What are the Possible Causes of the DTC B2653 2018 Toyota RAV4?
- Faulty Position Control ECU and Switch Assembly
- Position Control ECU and Switch Assembly harness is open or shorted
- Position Control ECU and Switch Assembly circuit poor electrical connection
- Faulty Lifter Motor
How to Fix the DTC B2653 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2653 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2653 2018 Toyota RAV4 code?
Need more information on how to fix the B2653 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2653 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2653 2018 Toyota RAV4 Code
1. What does OBDII code B2653 mean on a 2018 Toyota RAV4?
Code B2653 refers to a "Lifter Sensor Malfunction," indicating an issue with the lifter sensor or its circuit.
2. What are common symptoms of code B2653 on a 2018 Toyota RAV4?
Symptoms may include erratic seat adjustment behavior, failure of automatic seat positioning, or an illuminated check engine or warning light.
3. What causes code B2653 in a 2018 Toyota RAV4?
Possible causes include a faulty lifter sensor, wiring issues such as loose or damaged connections, or a malfunctioning seat control module.
4. How do I diagnose code B2653 on my Toyota RAV4?
Start by inspecting the lifter sensor and its wiring for damage, and use an OBDII scanner to confirm the code and monitor sensor data.
5. Can code B2653 affect the drivability of my 2018 Toyota RAV4?
No, this code typically affects seat adjustment functionality and does not impact the vehicle's drivability.
6. How do I fix code B2653 in a 2018 Toyota RAV4?
Repairs may include replacing the lifter sensor, repairing damaged wiring, or resetting the seat control module.
7. Can I clear code B2653 without fixing the problem?
Clearing the code without addressing the issue may temporarily remove the warning but will likely result in the code returning.
8. Is it safe to drive my Toyota RAV4 with code B2653?
Yes, it is safe to drive, as the issue is related to seat adjustments and does not affect critical vehicle systems.
9. How much does it cost to repair code B2653 on a Toyota RAV4?
Repair costs vary based on the issue but can range from $100 to $300 for sensor replacement or wiring repairs.
10. Can I prevent code B2653 from occurring on my 2018 Toyota RAV4?
Regular inspections of seat mechanisms and wiring can help prevent issues that lead to this code.
Discuss the causes and fixes for B2653 2018 Toyota RAV4 OBDII Code
Code B2653 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
