AutoCodesGeneric – B2644

B2644 Code - Electric Compressor Output Line Open

Quick Answer

The Inverter in the electric compressor outputs high-voltage to operate the motor. Common causes include Faulty Electric Compressor, Electric Compressor harness is open or shorted, Electric Compressor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2644 indicates Electric Compressor Output Line Open.
Common causes
Common causes include Faulty Electric Compressor, Electric Compressor harness is open or shorted, Electric Compressor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,877
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2644 Description

The Inverter in the electric compressor outputs high-voltage to operate the motor. If there is an open or short in the output circuit, the inverter in the electric compressor will stop compressor operation and output the Diagnostic Trouble Code (DTC). The output DTC will be memorized as a past and present DTC. Compressor control may not resume unless the ignition switch is turned OFF, and waiting for 10 minutes.
OBDII Code B2644 - Electric Compressor Output Line Open - AutoCodes.com
B2644 Code - Electric Compressor Output Line Open

What are the Possible Causes of the DTC B2644?

  • Faulty Electric Compressor
  • Electric Compressor harness is open or shorted
  • Electric Compressor circuit poor electrical connection
  • Faulty Inverter

How to Fix the DTC B2644?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2644 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2644 code?

Need more information on how to fix the B2644 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2644 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2644 Code

1. What does OBDII code B2644 mean?

B2644 indicates an open circuit in the electric compressor output line, which can prevent the air conditioning system from functioning properly.

2. What are the common symptoms of code B2644?

Common symptoms include the air conditioning system not cooling, an illuminated HVAC warning light, or no response from the compressor.

3. What causes the B2644 code to appear?

The code is typically caused by a damaged wiring harness, a disconnected or corroded connector, or a faulty electric compressor.

4. How can I diagnose the B2644 code?

Start by inspecting the wiring and connectors to the electric compressor for damage or corrosion. Use a multimeter to check for continuity in the output line.

5. Can I still drive my vehicle with code B2644?

Yes, but your air conditioning system may not function, which can affect comfort and defogging capability in certain conditions.

6. How is the B2644 code typically repaired?

Repairs may include fixing or replacing damaged wiring, cleaning or reconnecting connectors, or replacing the electric compressor if it’s faulty.

7. How much does it cost to fix the B2644 code?

Costs vary depending on the issue, ranging from a simple wiring repair (around $100) to replacing the electric compressor (up to $1,500 or more).

8. Can a blown fuse cause the B2644 code?

Yes, a blown fuse in the A/C system circuit can sometimes lead to this code, so checking fuses is a good first step.

9. Will clearing the B2644 code fix the problem?

Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.

10. Do I need a professional to fix the B2644 code?

If you're experienced with electrical diagnostics, you can attempt repairs yourself. Otherwise, it’s best to consult a professional technician.

Discuss the causes and fixes for B2644 OBDII Code

Code B2644 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play