AutoCodes – Cadillac – B2605 Cadillac

B2605 Cadillac Code - Right Daytime Running Lamps Control Circuit

Quick Answer

The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Right Headlamp Assembly, Right Headlamp Assembly harness is open or shorted, Right Headlamp Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2605 Cadillac indicates Right Daytime Running Lamps Control Circuit.
Common causes: Common causes include Faulty Right Headlamp Assembly, Right Headlamp Assembly harness is open or shorted, Right Headlamp Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 861

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 26, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2605 Cadillac Description

The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 volts depending on outside lighting conditions. The Body Control Module (BCM) provides a 5-volt reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) control module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either Daytime Running Lights (DRL) or Automatic Lamp Control (ALC) when the headlamp switch is in the AUTO position. In daylight conditions, the BCM will command the DRLs ON. During low light conditions, the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel the DRL operation. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a problem in the left DRL control circuit.

OBDII Code B2605 Cadillac - Right Daytime Running Lamps Control Circuit - AutoCodes.com — B2605 Cadillac Code - Right Daytime Running Lamps Control Circuit

What does this mean?

What are the Possible Causes of the DTC B2605 Cadillac?

Faulty Right Headlamp Assembly
Right Headlamp Assembly harness is open or shorted
Right Headlamp Assembly circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2605 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2605:01 Right Daytime Running Lamps Control Circuit short to Battery
B2605:02 Right Daytime Running Lamps Control Circuit Short to Ground
B2605:04 Right Daytime Running Lamps Control Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2605 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2605 Cadillac code?

Need more information on how to fix the B2605 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2605 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2605 Cadillac Code

What does the OBDII code B2605 mean on a Cadillac?

The code B2605 indicates an issue with the Right Daytime Running Lamps Control Circuit, which may involve wiring, the lamp itself, or the control module.

What are common symptoms of the B2605 code in a Cadillac?

Symptoms may include the right daytime running lamp not working, a warning light on the dashboard, or intermittent lamp operation.

What causes the B2605 code to appear?

Common causes include a faulty bulb, damaged or corroded wiring, a loose connector, or a malfunctioning control module.

How can I diagnose the B2605 code on my Cadillac?

Inspect the right daytime running lamp, check for damaged wiring or connectors, and use a multimeter to test circuit continuity. A scan tool may help confirm the issue.

Can a bad bulb trigger the B2605 code?

Yes, a burned-out or faulty bulb can cause the right daytime running lamp to fail, triggering the code.

How do I fix the B2605 code on my Cadillac?

Start by replacing the bulb if itâ€™s faulty. If the issue persists, inspect and repair damaged wiring or connectors, or replace the control module if needed.

Is the B2605 code safe to ignore?

While the code doesnâ€™t usually affect drivability, ignoring it may reduce visibility during daytime driving and could lead to electrical issues over time.

How much does it cost to repair the B2605 code on a Cadillac?

Repair costs vary, but replacing a bulb might cost $10-$50, while wiring repairs or control module replacement can cost $100-$500 or more.

Can the B2605 code be cleared without fixing the issue?

Clearing the code without addressing the root cause may temporarily remove the warning, but the code will likely return until the issue is repaired.

Do I need professional help to fix the B2605 code?

Simple fixes, like replacing a bulb, can be done at home. However, complex wiring or control module issues may require assistance from a qualified technician.