AutoCodes – Chevrolet – B2605 2014 Chevrolet Silverado

B2605 2014 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

Quick Answer

The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Right Headlamp Assembly, Right Headlamp Assembly harness is open or shorted, Right Headlamp Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2605 2014 Chevrolet Silverado indicates Right Daytime Running Lamps Control Circuit.
Common causes: Common causes include Faulty Right Headlamp Assembly, Right Headlamp Assembly harness is open or shorted, Right Headlamp Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 157

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 26, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2605 2014 Chevrolet Silverado Description

The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 volts depending on outside lighting conditions. The Body Control Module (BCM) provides a 5-volt reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) control module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either Daytime Running Lights (DRL) or Automatic Lamp Control (ALC) when the headlamp switch is in the AUTO position. In daylight conditions, the BCM will command the DRLs ON. During low light conditions, the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel the DRL operation. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a problem in the left DRL control circuit.

OBDII Code B2605 2014 Chevrolet Silverado - Right Daytime Running Lamps Control Circuit - AutoCodes.com — B2605 2014 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

What does this mean?

What are the Possible Causes of the DTC B2605 2014 Chevrolet Silverado?

Faulty Right Headlamp Assembly
Right Headlamp Assembly harness is open or shorted
Right Headlamp Assembly circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2605 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2605:01 Right Daytime Running Lamps Control Circuit short to Battery
B2605:02 Right Daytime Running Lamps Control Circuit Short to Ground
B2605:04 Right Daytime Running Lamps Control Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2605 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2605 2014 Chevrolet Silverado code?

Need more information on how to fix the B2605 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2605 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2605 2014 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B2605 in a 2014 Chevrolet Silverado related to the Right Daytime Running Lamps Control Circuit?

The common symptoms include the right daytime running lamp not working, flickering, or staying on constantly.

2. What are the possible causes of OBDII code B2605 in a 2014 Chevrolet Silverado?

Possible causes include a faulty daytime running lamp module, damaged wiring or connectors, or a malfunctioning light sensor.

3. How can I diagnose the issue with the Right Daytime Running Lamps Control Circuit in my 2014 Chevrolet Silverado?

You can start by visually inspecting the wiring and connectors for any damage. Using a multimeter to test the circuit continuity and checking the daytime running lamp module for proper operation can also help diagnose the issue.

4. Can I repair OBDII code B2605 in my 2014 Chevrolet Silverado myself?

Depending on your skill level and access to tools, you may be able to repair the issue yourself. Replacing a faulty daytime running lamp module or repairing damaged wiring are common DIY solutions.

5. Is it safe to continue driving my 2014 Chevrolet Silverado with OBDII code B2605 active?

It is not recommended to continue driving with this code, as it can affect the visibility of your vehicle to other drivers, especially during daytime hours. Get the issue resolved promptly.

6. How much does it typically cost to repair OBDII code B2605 in a 2014 Chevrolet Silverado?

The cost of repair can vary depending on the exact cause of the issue and whether you choose to fix it yourself or take it to a professional. Costs can range from a few dollars for simple repairs to a few hundred dollars for more complex issues.

7. Can extreme weather conditions affect the Right Daytime Running Lamps Control Circuit in a 2014 Chevrolet Silverado?

Yes, extreme weather conditions such as excessive heat or moisture can potentially damage the wiring or connectors, leading to issues with the daytime running lamps control circuit.

8. How do I reset the OBDII code B2605 in my 2014 Chevrolet Silverado after repairing the issue?

After repairing the issue causing the code, you can reset the OBDII code using a compatible OBDII scanner or by disconnecting the vehicle's battery for a few minutes.

9. Are there any preventive maintenance tips to avoid OBDII code B2605 in a 2014 Chevrolet Silverado?

Regularly inspecting the condition of your vehicle's wiring and connectors, as well as keeping the daytime running lamps clean and free of debris, can help prevent issues with the right daytime running lamps control circuit.

10. Can a malfunctioning light sensor cause OBDII code B2605 in a 2014 Chevrolet Silverado?

Yes, a malfunctioning light sensor can disrupt the proper operation of the daytime running lamps control circuit, leading to the activation of OBDII code B2605 in a 2014 Chevrolet Silverado.