B2593 Lincoln Code - Door Reversed While Closing Due To An Obstacle
Quick Answer
When the Power Sliding Door (PSD) Module receives a close signal, power is supplied to the drive assembly actuator clutch and motor. Common causes include Obstacle, Power Sliding Door (PSD) Adjustment, Low Battery Voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2593 Lincoln indicates Door Reversed While Closing Due To An Obstacle.
- Common causes
- Common causes include Obstacle, Power Sliding Door (PSD) Adjustment, Low Battery Voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2593 Lincoln Description
What are the Possible Causes of the DTC B2593 Lincoln?
- Obstacle
- Power Sliding Door (PSD) Adjustment
- Low Battery Voltage
How to Fix the DTC B2593 Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2593 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2593 Lincoln code?
Need more information on how to fix the B2593 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2593 Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2593 Lincoln Code
1. What does the OBDII code B2593 mean on a Lincoln vehicle?
The B2593 code indicates that the door reversed while closing due to an obstacle, meaning the door encountered resistance or an obstruction during operation.
2. What are common symptoms of the B2593 code?
Symptoms include the door not closing properly, reversing midway, unusual noises during operation, or a warning light/message on the dashboard.
3. What causes the B2593 code to appear?
Common causes include a physical obstruction in the door's path, a malfunctioning door motor, misaligned door tracks, or a faulty obstacle detection sensor.
4. Can the B2593 code be caused by dirt or debris?
Yes, dirt or debris in the door tracks or seals can obstruct the door's movement and trigger the B2593 code.
5. How can I fix the B2593 code on my Lincoln?
Start by inspecting and removing any obstructions in the door’s path. Clean the tracks, check for misalignment, and test the door motor and sensors for proper function.
6. Is a faulty door sensor likely to cause the B2593 code?
Yes, a defective obstacle detection sensor can falsely detect an obstruction and cause the door to reverse.
7. Can cold weather trigger the B2593 code?
Cold weather can make door seals stiff or cause ice to form in the tracks, potentially triggering the code if the door encounters resistance.
8. What tools are needed to diagnose the B2593 code?
A scan tool capable of reading manufacturer-specific codes and inspecting door sensors and motor functionality is essential for diagnosis.
9. Is it safe to drive with the B2593 code active?
While the vehicle can be driven, the affected door may not function properly, which can be inconvenient or pose a safety concern if it doesn't close securely.
10. Should I reset the B2593 code after repairs?
Yes, after addressing the issue, clear the code using a scan tool and test the door to ensure the problem is resolved.
Discuss the causes and fixes for B2593 Lincoln OBDII Code
Code B2593 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
