B2593 Ford Code - Door Reversed While Closing Due To An Obstacle
Quick Answer
When the Power Sliding Door (PSD) Module receives a close signal, power is supplied to the drive assembly actuator clutch and motor. Common causes include Obstacle, Power Sliding Door (PSD) Adjustment, Low Battery Voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2593 Ford indicates Door Reversed While Closing Due To An Obstacle.
- Common causes
- Common causes include Obstacle, Power Sliding Door (PSD) Adjustment, Low Battery Voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2593 Ford Description
What are the Possible Causes of the DTC B2593 Ford?
- Obstacle
- Power Sliding Door (PSD) Adjustment
- Low Battery Voltage
How to Fix the DTC B2593 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2593 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2593 Ford code?
Need more information on how to fix the B2593 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2593 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2593 Ford Code
1. What does OBDII code B2593 mean on a Ford vehicle?
Code B2593 indicates that the door system detected an obstacle while closing, causing the door to reverse its motion to prevent damage or injury.
2. What are the common symptoms of code B2593?
Symptoms may include the door reversing unexpectedly when closing, the door not fully latching, or a warning message appearing on the dashboard.
3. What causes code B2593 to trigger?
This code can be caused by physical obstructions in the door's path, a malfunctioning door sensor, faulty wiring, or issues with the door control module.
4. How can I fix the B2593 code on my Ford?
Inspect the door's path for obstructions, check the door sensor for damage or misalignment, inspect wiring for corrosion or damage, and reset the system if no faults are found.
5. Can I still drive my Ford with the B2593 code active?
Yes, you can drive the vehicle, but the affected door may not operate correctly, which could be inconvenient or compromise safety.
6. How do I reset the B2593 code after repairs?
You can clear the code using an OBDII scanner. Ensure the issue is resolved before resetting to avoid the code returning.
7. What tools are needed to diagnose code B2593?
An OBDII scanner, a multimeter for testing electrical connections, and basic tools for inspecting the door mechanism may be required.
8. Can a dirty or misaligned door sensor cause code B2593?
Yes, dirt, debris, or misalignment of the sensor can cause it to incorrectly detect an obstacle and trigger the code.
9. How much does it cost to repair code B2593 on a Ford?
Repair costs vary depending on the issue. Cleaning or adjusting the sensor is inexpensive, while replacing the door control module or repairing wiring may be more costly.
10. Does code B2593 always indicate a physical obstruction?
No, the code can also be triggered by sensor malfunctions, wiring issues, or software glitches in the door control system.
Discuss the causes and fixes for B2593 Ford OBDII Code
Code B2593 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
