AutoCodes – Chevrolet – B2580 2018 Chevrolet Silverado

B2580 2018 Chevrolet Silverado Code - Headlamp High Beam Control Circuit

Quick Answer

The high beam and flash-to-pass functions are contained within the turn signal/multifunction switch. Common causes include Faulty Headlamp High Beam Relay, Headlamp High Beam Relay harness is open or shorted, Headlamp High Beam Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2580 2018 Chevrolet Silverado indicates Headlamp High Beam Control Circuit.
Common causes: Common causes include Faulty Headlamp High Beam Relay, Headlamp High Beam Relay harness is open or shorted, Headlamp High Beam Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 318

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 26, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2580 2018 Chevrolet Silverado Description

The high beam and flash-to-pass functions are contained within the turn signal/multifunction switch. The Body Control Module (BCM) provides the turn signal/multifunction switch with two signal circuits, the high beam signal circuit, and the flash-to-pass signal circuit. When the low beam headlamps are ON and the turn signal/multifunction switch is placed in the high beam position, ground is applied to the BCM through the high beam signal circuit. The BCM responds to the high beam request by applying ground to the high beam relay control circuit which energizes the high beam relay. With the high beam relay energized, the switch contacts close allowing battery voltage to flow through the high beam fuse to the high beam control circuits illuminating the high beam headlamps.

OBDII Code B2580 2018 Chevrolet Silverado - Headlamp High Beam Control Circuit - AutoCodes.com — B2580 2018 Chevrolet Silverado Code - Headlamp High Beam Control Circuit

What does this mean?

What are the Possible Causes of the DTC B2580 2018 Chevrolet Silverado?

Faulty Headlamp High Beam Relay
Headlamp High Beam Relay harness is open or shorted
Headlamp High Beam Relay circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2580 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2580:01 High Beam Control Circuit Short to Battery
B2580:02 High Beam Control Circuit Short to Ground
B2580:04 High Beam Control Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2580 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2580 2018 Chevrolet Silverado code?

Need more information on how to fix the B2580 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2580 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2580 2018 Chevrolet Silverado Code

1. What are common symptoms of OBDII code B2580 in a 2018 Chevrolet Silverado?

- Common symptoms include malfunctioning high beam control, dim or flickering high beams, or total loss of high beam functionality.

2. What are possible causes of OBDII code B2580 in a 2018 Chevrolet Silverado?

- Possible causes include a faulty high beam control switch, wiring issues, a defective high beam relay, or a problem with the body control module.

3. How can I diagnose the OBDII code B2580 in my 2018 Chevrolet Silverado?

- Use a diagnostic scanner to retrieve the code, inspect the high beam control switch and wiring for damage, test the high beam relay, and check the body control module for any faults.

4. Can I still drive my 2018 Chevrolet Silverado with OBDII code B2580?

- It is not recommended to drive with the high beam control circuit malfunctioning as it can affect visibility and compromise safety, especially at night.

5. How do I repair OBDII code B2580 in a 2018 Chevrolet Silverado?

- Repair options may include replacing the high beam control switch, repairing or replacing damaged wiring, swapping out the high beam relay, or reprogramming the body control module.

6. Are there any DIY tips for fixing OBDII code B2580 in a 2018 Chevrolet Silverado?

- DIY tips include checking for loose connections, ensuring proper grounding, and following the vehicle's service manual for step-by-step troubleshooting.

7. Can a mechanic help me fix OBDII code B2580 in my 2018 Chevrolet Silverado?

- Yes, a certified mechanic can diagnose the issue accurately, perform the necessary repairs, and reset the OBDII system to clear the code.

8. Will resetting the OBDII system clear code B2580 in my 2018 Chevrolet Silverado?

- Resetting the system may temporarily clear the code, but it will reappear if the underlying issue causing the high beam control circuit problem is not addressed.

9. How long does it typically take to repair OBDII code B2580 in a 2018 Chevrolet Silverado?

- The repair time can vary depending on the exact cause of the issue, but it may take anywhere from 1 to 3 hours for a mechanic to diagnose and fix the problem.

10. Is OBDII code B2580 a common issue in 2018 Chevrolet Silverado vehicles?

- While not extremely common, issues with the headlamp high beam control circuit can occur in 2018 Chevrolet Silverado vehicles due to various factors like wear and tear or electrical faults.