AutoCodes – Dodge – B2546 Dodge

B2546 Dodge Code - Decklid Latch Limit Switch Circuit Low

Quick Answer

The Convertible Top is fairly typical of convertible tops. Common causes include Faulty Decklid Latch Limit Switch, Decklid Latch Limit Switch harness is open or shorted, Decklid Latch Limit Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2546 Dodge indicates Decklid Latch Limit Switch Circuit Low.
Common causes: Common causes include Faulty Decklid Latch Limit Switch, Decklid Latch Limit Switch harness is open or shorted, Decklid Latch Limit Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 699

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2546 Dodge Description

The Convertible Top is fairly typical of convertible tops. There are three types of failures possible: Electrical failure (switches, wiring, motor, etc.), Hydraulic failure (fluid level low, leaks, pump internal, etc.), and Mechanical failure (binding roof, bent links, obstructions, etc.). Each type of failure mode will be rationalized by the power Top Control Module (PTCM) and labeled with a Diagnostic Trouble Code (DTC). The DTCs set by the PTCM can also be considered to have three types of failure modes:
1. Performance - These are time out DTCs, meaning the system timed out waiting for the next switch in sequence to change state. When the PTCM does not get the state change in the expected amount of time, it assumes something may be wrong and stops any further top operation in that direction. Typically the pump will run for 10 second before it times out.
2. Circuit Low - These DTCs set for a circuit that stays active at all times, meaning the signal circuit to the specified switch is continuously grounded. This could relate to a short to ground on the signal circuit, a sticking switch, or even a mechanical issue not allowing the switch to become inactive.
3. Correlation - These DTCs specifically relate two switches in a subcomponent (deck lid, tonneau drive, header latch, etc.) of the convertible top system. Both of the specified switches will be active in one position of the subcomponent (extended, retracted, open, closed, etc.). The switch that will not change state while attempting to operate the convertible top system, is the most likely area for attention.

OBDII Code B2546 Dodge - Decklid Latch Limit Switch Circuit Low - AutoCodes.com — B2546 Dodge Code - Decklid Latch Limit Switch Circuit Low

What does this mean?

What are the Possible Causes of the DTC B2546 Dodge?

Faulty Decklid Latch Limit Switch
Decklid Latch Limit Switch harness is open or shorted
Decklid Latch Limit Switch circuit poor electrical connection
Faulty Power Top Control Module (PTCM)

How to Fix the DTC B2546 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2546 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2546 Dodge code?

Need more information on how to fix the B2546 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2546 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2546 Dodge Code

1. What are the common symptoms of OBDII code B2546 in a Dodge related to the Decklid Latch Limit Switch Circuit Low?

- Common symptoms include issues with the decklid not latching properly, the trunk not closing securely, or warning lights related to the trunk system on the dashboard.

2. What can cause the OBDII code B2546 in a Dodge indicating a Decklid Latch Limit Switch Circuit Low?

- This code can be caused by a faulty decklid latch limit switch, damaged wiring in the circuit, or a malfunctioning control module.

3. How can I diagnose the OBDII code B2546 in a Dodge for the Decklid Latch Limit Switch Circuit Low?

- You can diagnose this code by inspecting the decklid latch and wiring for any visible damage, checking the connections, and using a multimeter to test the switch's functionality.

4. Can I repair the OBDII code B2546 in a Dodge related to the Decklid Latch Limit Switch Circuit Low myself?

- Depending on your skill level, you may be able to repair this issue yourself by replacing the faulty limit switch, repairing damaged wiring, or resetting the control module.

5. Is it safe to continue driving my Dodge with the OBDII code B2546 for the Decklid Latch Limit Switch Circuit Low?

- It is recommended not to drive the vehicle with this issue as it may lead to potential safety hazards due to the trunk not latching securely.

6. Are there any quick temporary fixes for the OBDII code B2546 in a Dodge indicating a Decklid Latch Limit Switch Circuit Low?

- Temporary fixes may include manually securing the trunk with straps or bungee cords to prevent it from opening while driving until the issue is properly addressed.

7. How much does it typically cost to repair the OBDII code B2546 in a Dodge related to the Decklid Latch Limit Switch Circuit Low?

- The cost of repair can vary depending on the extent of the issue and whether you choose to fix it yourself or take it to a professional mechanic.

8. Can extreme weather conditions affect the occurrence of the OBDII code B2546 for the Decklid Latch Limit Switch Circuit Low in a Dodge?

- Yes, extreme temperature changes or exposure to moisture can sometimes lead to electrical issues causing this code to appear.

9. Will resetting the OBDII code B2546 in a Dodge related to the Decklid Latch Limit Switch Circuit Low solve the problem?

- Resetting the code may temporarily clear the warning, but it is essential to diagnose and address the underlying issue to prevent it from reoccurring.

10. How long does it typically take to repair the OBDII code B2546 in a Dodge related to the Decklid Latch Limit Switch Circuit Low?

- The repair time can vary depending on the exact cause of the issue, but it may range from a quick fix to a more involved repair that could take several hours to complete.