B2528 Dodge Code - Tonneau Cover Control Circuit Open Or Hardware Thermo Protection Active
Quick Answer
When the Tonneau Cover Motor is given a command to move but there is no current draw on the driver circuits for over 400ms, this code will set. Common causes include Faulty Tonneau Cover Motor, Tonneau Cover Motor harness is open or shorted, Tonneau Cover Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2528 Dodge indicates Tonneau Cover Control Circuit Open Or Hardware Thermo Protection Active.
- Common causes
- Common causes include Faulty Tonneau Cover Motor, Tonneau Cover Motor harness is open or shorted, Tonneau Cover Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2528 Dodge Description
What are the Possible Causes of the DTC B2528 Dodge?
- Faulty Tonneau Cover Motor
- Tonneau Cover Motor harness is open or shorted
- Tonneau Cover Motor circuit poor electrical connection
- Faulty Power Top Control Module (PTCM)
How to Fix the DTC B2528 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2528 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2528 Dodge code?
Need more information on how to fix the B2528 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2528 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2528 Dodge Code
1. What are common symptoms of OBDII code B2528 in a Dodge related to the tonneau cover control circuit?
The most common symptoms include the tonneau cover not opening or closing properly, the control switch not responding, or the cover getting stuck in one position.
2. What causes the OBDII code B2528 related to the tonneau cover control circuit to trigger in a Dodge?
This code is typically triggered due to an open circuit in the tonneau cover control system or when the hardware's thermo protection feature becomes active.
3. How can I diagnose the issue causing OBDII code B2528 in my Dodge's tonneau cover control circuit?
You can start by checking the wiring and connectors for any damage or corrosion, testing the control switch for proper functionality, and ensuring the tonneau cover motor is working correctly.
4. Is it safe to continue driving my Dodge with the OBDII code B2528 related to the tonneau cover control circuit?
While the vehicle should still operate fine, it's recommended to address the issue promptly to avoid potential further damage to the tonneau cover system.
5. Can I reset the OBDII code B2528 in my Dodge related to the tonneau cover control circuit by disconnecting the battery?
Disconnecting the battery may clear the code temporarily, but if the underlying issue is not fixed, the code is likely to reappear after some driving cycles.
6. What are some DIY repair tips for fixing OBDII code B2528 in a Dodge caused by the tonneau cover control circuit issue?
You can start by visually inspecting the wiring and connectors, checking the fuse related to the tonneau cover system, and testing the control switch for continuity.
7. Is it recommended to seek professional help to fix OBDII code B2528 in my Dodge due to the tonneau cover control circuit problem?
If you're not experienced with automotive electrical systems, it's advisable to consult a professional mechanic or technician to properly diagnose and repair the issue.
8. Are there any recalls or technical service bulletins related to OBDII code B2528 in Dodge vehicles concerning the tonneau cover control circuit?
It's recommended to check with Dodge dealerships or online resources for any recalls or technical service bulletins related to this specific OBDII code and issue.
9. Can extreme weather conditions affect the triggering of OBDII code B2528 in a Dodge related to the tonneau cover control circuit?
Extreme temperatures, especially high heat, can sometimes cause the thermo protection feature to activate, leading to the triggering of this OBDII code.
10. How can I prevent OBDII code B2528 related to the tonneau cover control circuit from occurring in my Dodge in the future?
Regularly inspecting and maintaining the tonneau cover system, avoiding physical damage to the wiring, and keeping the control switch clean and functional can help prevent this code from triggering.
Discuss the causes and fixes for B2528 Dodge OBDII Code
Code B2528 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
