AutoCodesDodge – B2518 Dodge

B2518 Dodge Code - Left Rear Window Position Sensor 2 Circuit Performance

Quick Answer

The Power Top Control Module (PTCM) monitors the Left Rear Window Position Sensor 2 Circuit. Common causes include Faulty Left Rear Window Hall Sensor A, Left Rear Window Hall Sensor A harness is open or shorted, Left Rear Window Hall Sensor A circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2518 Dodge indicates Left Rear Window Position Sensor 2 Circuit Performance.
Common causes
Common causes include Faulty Left Rear Window Hall Sensor A, Left Rear Window Hall Sensor A harness is open or shorted, Left Rear Window Hall Sensor A circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 521
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 22, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2518 Dodge Description

The Power Top Control Module (PTCM) monitors the Left Rear Window Position Sensor 2 Circuit. When the Left Rear Window Hall Sensor A Signal fails to change after a window movement command, this code will set.
OBDII Code B2518 Dodge - Left Rear Window Position Sensor 2 Circuit Performance - AutoCodes.com
B2518 Dodge Code - Left Rear Window Position Sensor 2 Circuit Performance

What are the Possible Causes of the DTC B2518 Dodge?

  • Faulty Left Rear Window Hall Sensor A
  • Left Rear Window Hall Sensor A harness is open or shorted
  • Left Rear Window Hall Sensor A circuit poor electrical connection
  • Faulty Power Top Control Module (PTCM)

How to Fix the DTC B2518 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2518 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2518 Dodge code?

Need more information on how to fix the B2518 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2518 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2518 Dodge Code

1. What does the OBDII code B2518 mean on a Dodge vehicle?

The B2518 code indicates an issue with the Left Rear Window Position Sensor 2 Circuit, typically related to its performance or functionality.

2. What are common symptoms of the B2518 code in a Dodge?

Symptoms may include the rear left window not operating properly, erratic movement, or the window being stuck in one position.

3. What causes the B2518 code to trigger?

Common causes include a faulty window position sensor, damaged wiring or connectors in the circuit, or a malfunctioning window motor.

4. Can I still drive with the B2518 code active?

Yes, you can drive, but the rear left window may not function correctly, which could cause inconvenience or compromise ventilation.

5. How do I diagnose the B2518 code on my Dodge?

Start by inspecting the wiring and connectors for damage, then test the window position sensor and motor for proper operation using a multimeter or scan tool.

6. How can I fix the B2518 code in a Dodge?

Repairs might include replacing the window position sensor, repairing damaged wiring, or replacing the window motor if it’s faulty.

7. Is the B2518 code specific to Dodge vehicles?

No, while this code is applicable to Dodge vehicles, it can also appear in other makes and models with similar systems.

8. How much does it cost to fix the B2518 code?

Repair costs can vary, but replacing a window position sensor typically costs between $50 and $200, plus labor if done by a mechanic.

9. Can a software issue cause the B2518 code?

While rare, a software glitch in the body control module (BCM) could potentially trigger this code. Reflashing or updating the BCM may be necessary in such cases.

10. Will clearing the B2518 code with a scan tool fix the problem?

Clearing the code may temporarily remove it, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for B2518 Dodge OBDII Code

Code B2518 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play