AutoCodes – Mercury – B2503 Mercury

B2503 Mercury Code - Right Lamp Low Beam Circuit Failure

Quick Answer

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. Common causes include Faulty Right Lamp Low Beam, Right Lamp Low Beam harness is open or shorted, Right Lamp Low Beam circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2503 Mercury indicates Right Lamp Low Beam Circuit Failure.
Common causes: Common causes include Faulty Right Lamp Low Beam, Right Lamp Low Beam harness is open or shorted, Right Lamp Low Beam circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 737

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 16, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2503 Mercury Description

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits. When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to voltage from the Right (RH) low beam voltage supply circuit.

OBDII Code B2503 Mercury - Right Lamp Low Beam Circuit Failure - AutoCodes.com — B2503 Mercury Code - Right Lamp Low Beam Circuit Failure

What does this mean?

What are the Possible Causes of the DTC B2503 Mercury?

Faulty Right Lamp Low Beam
Right Lamp Low Beam harness is open or shorted
Right Lamp Low Beam circuit poor electrical connection
Faulty Headlamp Switch
Faulty Smart Junction Box (SJB)

How to Fix the DTC B2503 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2503 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2503 Mercury code?

Need more information on how to fix the B2503 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2503 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2503 Mercury Code

1. What does the OBDII code B2503 mean for a Mercury vehicle?

The B2503 code indicates a failure in the right low beam headlamp circuit, meaning the system has detected an open or short in the wiring or components related to the right low beam.

2. What are the common symptoms of the B2503 code?

The most common symptom is that the right low beam headlamp will not function. You may also notice a warning light or message on the dashboard.

3. What causes the B2503 code to appear?

Potential causes include a blown bulb, damaged wiring, a faulty headlamp socket, a defective headlamp switch, or a problem with the vehicleâ€™s body control module (BCM).

4. How can I diagnose the B2503 code?

Start by inspecting the right low beam bulb, wiring, and connections for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

5. Can driving with the B2503 code damage my Mercury?

While the code itself wonâ€™t cause damage, having a non-functional headlamp reduces visibility and can be a safety hazard, especially at night or in poor weather.

6. How do I fix the B2503 code?

Repairs may include replacing the right low beam bulb, repairing or replacing damaged wiring, cleaning corroded connections, or replacing a faulty headlamp switch.

7. How much does it cost to fix the B2503 code?

The cost can vary depending on the issue. Replacing a bulb may cost $20-$50, while repairing wiring or replacing a switch could cost $100-$300 or more.

8. Can I reset the B2503 code without fixing the issue?

Clearing the code with a scan tool may temporarily remove it, but it will likely return if the underlying problem isnâ€™t addressed.

9. Is the B2503 code specific to Mercury vehicles?

While the B2503 code can appear in other makes, its exact meaning and troubleshooting steps are tailored to Mercury and some Ford vehicles.

10. Can a faulty BCM cause the B2503 code?

Yes, a malfunctioning Body Control Module (BCM) could fail to properly control the headlamp circuit, leading to this code. However, this is less common and should be diagnosed last.