AutoCodesCadillac – B2502 Cadillac

B2502 Cadillac Code - Park Relay Shorted To Ground

Quick Answer

When transaxle is in Park, Platform Zone Module (PZM) controls park relay output low to enable Brake Transaxle Shift Interlock (BTSI). Common causes include Faulty Park Relay, Park Relay harness is open or shorted, Park Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2502 Cadillac indicates Park Relay Shorted To Ground.
Common causes
Common causes include Faulty Park Relay, Park Relay harness is open or shorted, Park Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,518
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 16, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2502 Cadillac Description

When transaxle is in Park, Platform Zone Module (PZM) controls park relay output low to enable Brake Transaxle Shift Interlock (BTSI). PZM will continuously monitor this voltage at PZM. The Diagnostic Trouble Code (DTC) B2502 will set when park relay output is not active, and PZM determines output is low for 2 consecutive monitoring cycles. DTC B2502 will clear when park relay output is not active, and PZM determines output is high for one monitoring cycle.
OBDII Code B2502 Cadillac - Park Relay Shorted To Ground - AutoCodes.com
B2502 Cadillac Code - Park Relay Shorted To Ground

What are the Possible Causes of the DTC B2502 Cadillac?

  • Faulty Park Relay
  • Park Relay harness is open or shorted
  • Park Relay circuit poor electrical connection
  • Faulty Platform Zone Module (PZM)

How to Fix the DTC B2502 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2502 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2502 Cadillac code?

Need more information on how to fix the B2502 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2502 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2502 Cadillac Code

1. What does the OBDII code B2502 mean on a Cadillac?

The B2502 code indicates that the park relay circuit is shorted to ground, which can affect the vehicle's ability to properly switch between parking and other modes.

2. What are the symptoms of the B2502 code on a Cadillac?

Common symptoms include issues with parking lights, malfunctioning park relay, or electrical problems such as blown fuses.

3. What causes the B2502 code on a Cadillac?

The most common causes are damaged wiring, a short circuit, a faulty park relay, or corrosion in the relay connections.

4. Can the B2502 code cause safety concerns?

Yes, depending on the severity, it could affect the functionality of parking lights or other electrical systems, potentially creating safety issues.

5. How is the B2502 code diagnosed on a Cadillac?

A technician will typically inspect the park relay circuit for shorted wiring, test the park relay, and check for corrosion or loose connections.

6. Can I drive my Cadillac with the B2502 code?

It’s possible to drive with this code, but it’s not recommended as it could lead to further electrical damage or compromised vehicle safety systems.

7. How do you repair the B2502 code on a Cadillac?

Repairs might include replacing the park relay, repairing or replacing damaged wiring, or cleaning and securing electrical connections.

8. How much does it cost to fix the B2502 code on a Cadillac?

Repair costs can vary but typically range from $100 to $300, depending on whether the wiring, relay, or other components need replacement.

9. Can a faulty park relay trigger the B2502 code?

Yes, a faulty park relay is a common cause of this code and should be tested and replaced if necessary.

10. How can I prevent the B2502 code from recurring on my Cadillac?

Regularly inspect and maintain the vehicle’s wiring and electrical connections to prevent shorts or corrosion in the system.

Discuss the causes and fixes for B2502 Cadillac OBDII Code

Code B2502 Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play