AutoCodesDodge – B2394 Dodge

B2394 Dodge Code - Flash To Pass / Optical Horn Switch Circuit Stuck

Quick Answer

The Cluster monitors the Flash To Pass / Optical Horn Switch Circuit. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2394 Dodge indicates Flash To Pass / Optical Horn Switch Circuit Stuck.
Common causes
Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,132
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 04, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2394 Dodge Description

The Cluster monitors the Flash To Pass / Optical Horn Switch Circuit. The Diagnostic Trouble Code (DTC) is set when the Cluster detects the Flash to Pass Switch Input circuit voltage is less than the expected value.
OBDII Code B2394 Dodge - Flash To Pass / Optical Horn Switch Circuit Stuck - AutoCodes.com
B2394 Dodge Code - Flash To Pass / Optical Horn Switch Circuit Stuck

What are the Possible Causes of the DTC B2394 Dodge?

  • Faulty Multifunction Switch
  • Multifunction Switch harness is open or shorted
  • Multifunction Switch circuit poor electrical connection
  • Faulty Cluster

How to Fix the DTC B2394 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2394 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2394 Dodge code?

Need more information on how to fix the B2394 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2394 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2394 Dodge Code

1. What does the OBDII code B2394 mean on a Dodge vehicle?

The B2394 code indicates a problem with the Flash To Pass/Optical Horn Switch Circuit being stuck, which impacts the high-beam flash or horn functionality.

2. What are the common symptoms of the B2394 code?

Symptoms include the inability to flash the high beams, the horn not working when using the optical horn switch, or the high beams staying on continuously.

3. What causes the B2394 code to appear?

Possible causes include a faulty flash-to-pass switch, damaged wiring or connectors in the circuit, or a malfunctioning body control module (BCM).

4. How can I diagnose the B2394 code?

Start by visually inspecting the flash-to-pass switch, wiring, and connectors for damage or corrosion. Use a scan tool to monitor switch operation and test the circuit for continuity.

5. Can I drive my Dodge with the B2394 code active?

Yes, but you may lose the ability to flash your high beams or use the horn via the optical horn switch, which could be unsafe in certain driving conditions.

6. How do I fix the B2394 code on my Dodge?

Repairs may involve replacing the flash-to-pass switch, repairing or replacing damaged wiring, or reprogramming or replacing the BCM if it’s defective.

7. How much does it cost to repair the B2394 code?

Repair costs vary depending on the root cause, ranging from $50 to $150 for a switch replacement to $300 or more if the BCM needs replacement.

8. Can a stuck flash-to-pass switch trigger the B2394 code?

Yes, a stuck or defective flash-to-pass switch is a common cause of the B2394 code.

9. Will clearing the B2394 code with a scan tool fix the problem?

Clearing the code may temporarily reset the system, but the issue will likely return unless the underlying problem is resolved.

10. Does the B2394 code affect other vehicle systems?

The B2394 code primarily affects the high-beam flash and horn functions, but it may also indicate broader electrical issues if tied to the BCM.

Discuss the causes and fixes for B2394 Dodge OBDII Code

Code B2394 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play