B2376 Jeep Code - Rear Wiper Switch Input Circuit
Quick Answer
The Cluster monitors the Rear Wiper Switch Input Circuit. Common causes include Faulty Rear Wiper Switch, Rear Wiper Switch harness is open or shorted, Rear Wiper Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2376 Jeep indicates Rear Wiper Switch Input Circuit.
- Common causes
- Common causes include Faulty Rear Wiper Switch, Rear Wiper Switch harness is open or shorted, Rear Wiper Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2376 Jeep Description
What are the Possible Causes of the DTC B2376 Jeep?
- Faulty Rear Wiper Switch
- Rear Wiper Switch harness is open or shorted
- Rear Wiper Switch circuit poor electrical connection
- Faulty Right Multifunction Switch
How to Fix the DTC B2376 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2376 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2376 Jeep code?
Need more information on how to fix the B2376 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2376 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2376 Jeep Code
1. What does the OBDII code B2376 mean for a Jeep?
The code B2376 indicates an issue with the rear wiper switch input circuit, which may involve a malfunction or improper signal from the rear wiper switch to the body control module (BCM).
2. What are the common symptoms of the B2376 code?
Common symptoms include the rear wiper not functioning, intermittent operation, or the wiper being stuck in one position.
3. What causes the B2376 code to appear?
Common causes include a faulty rear wiper switch, damaged wiring or connectors in the circuit, or a malfunctioning body control module (BCM).
4. How can I diagnose the cause of the B2376 code?
Start by inspecting the rear wiper switch, wiring, and connectors for visible damage or corrosion. Use a multimeter to test the continuity and voltage in the circuit.
5. Can I drive my Jeep with the B2376 code active?
Yes, you can drive with this code active, but the rear wiper may not function properly, which could reduce visibility during adverse weather conditions.
6. How do I fix the B2376 code on my Jeep?
Repair or replace any damaged wiring or connectors, clean any corroded terminals, and replace the rear wiper switch if necessary. If the problem persists, check the BCM.
7. How much does it cost to fix the B2376 code?
Repair costs vary but typically range from $50 to $200, depending on whether you need to replace the rear wiper switch or repair wiring.
8. Can a bad rear wiper motor cause the B2376 code?
While the code specifically relates to the switch input circuit, a faulty motor could indirectly contribute to the issue if it causes irregular feedback to the BCM.
9. Will clearing the B2376 code solve the problem?
Clearing the code will temporarily remove it, but if the underlying issue isn’t resolved, the code will return.
10. Does the B2376 code require professional repair?
If you’re familiar with electrical systems, you can attempt to diagnose and fix the issue yourself. Otherwise, it’s best to seek professional assistance to avoid further damage.
Discuss the causes and fixes for B2376 Jeep OBDII Code
Code B2376 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
