AutoCodes – GMC – B2355 2015 GMC Sierra

B2355 2015 GMC Sierra Code - Driver Seat Front Vertical Position Sensor Circuit

Quick Answer

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. Common causes include Faulty Driver Seat Front Vertical Motor, Driver Seat Front Vertical Motor harness is open or shorted, Driver Seat Front Vertical Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2355 2015 GMC Sierra indicates Driver Seat Front Vertical Position Sensor Circuit.
Common causes: Common causes include Faulty Driver Seat Front Vertical Motor, Driver Seat Front Vertical Motor harness is open or shorted, Driver Seat Front Vertical Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 218

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2355 2015 GMC Sierra Description

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. The module supplies each sensor with a 12 V reference circuit only when any seat motor is active, and a low side signal circuit. During seat motor operation, the hall effect position sensor provides a determined number of pulse signals for every revolution of the motor shaft. The scan tool displays these pulse signals as counts that range from 0–65,535. The module counts the feedback pulses from each sensor to determine seat position and end-of-travel limits for each of the seat motors. High scan tool count values indicate forward or upward seat positions while low count values indicate rearward or downward seat positions. The Diagnostic Trouble Code (DTC) will be set when there is a fault in the Driver Seat Front Vertical Position Sensor Circuit.

OBDII Code B2355 2015 GMC Sierra - Driver Seat Front Vertical Position Sensor Circuit - AutoCodes.com — B2355 2015 GMC Sierra Code - Driver Seat Front Vertical Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC B2355 2015 GMC Sierra?

Faulty Driver Seat Front Vertical Motor
Driver Seat Front Vertical Motor harness is open or shorted
Driver Seat Front Vertical Motor circuit poor electrical connection
Faulty Driver Seat Memory Control Module

How to Fix the DTC B2355 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1855:01 Driver Seat Front Vertical Position Sensor Circuit Short to Battery
B1855:02 Driver Seat Front Vertical Position Sensor Circuit Short to Ground
B1855:06 Driver Seat Front Vertical Position Sensor Circuit Low Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2355 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2355 2015 GMC Sierra code?

Need more information on how to fix the B2355 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2355 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2355 2015 GMC Sierra Code

1. What are the common symptoms of OBDII code B2355 in a 2015 GMC Sierra related to the Driver Seat Front Vertical Position Sensor Circuit?

- Common symptoms may include erratic movement or malfunction of the driver's seat, an illuminated airbag warning light on the dashboard, or issues with seat adjustment controls.

2. What are the possible causes of OBDII code B2355 in a 2015 GMC Sierra?

- Possible causes may include a faulty front vertical position sensor, damaged wiring or connectors in the sensor circuit, or a malfunction in the seat control module.

3. How can I diagnose the issue related to OBDII code B2355 in my 2015 GMC Sierra?

- Diagnosis typically involves using a scan tool to retrieve the specific fault code, inspecting the wiring and connectors for damage, and testing the front vertical position sensor for proper functionality.

4. Can I continue driving my 2015 GMC Sierra with OBDII code B2355 present?

- It is not recommended to continue driving with this code present, as it may affect the proper operation of the driver's seat and potentially impact the safety systems of the vehicle.

5. How can I repair OBDII code B2355 in my 2015 GMC Sierra?

- Repair may involve replacing the front vertical position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the seat control module if necessary.

6. Are there any specific tips for troubleshooting OBDII code B2355 in a 2015 GMC Sierra?

- Some tips include checking for loose or damaged wiring, ensuring all connectors are securely attached, and consulting the vehicle's service manual for specific diagnostic procedures.

7. Is it possible to reset OBDII code B2355 in a 2015 GMC Sierra without fixing the underlying issue?

- While you can clear the code with a scan tool, it is important to address the root cause of the problem to prevent the code from reoccurring and ensure the proper functioning of the driver's seat.

8. How long does it typically take to repair OBDII code B2355 in a 2015 GMC Sierra?

- The repair time can vary depending on the specific cause of the code, but it may take anywhere from 1-3 hours for diagnosis and repair by a qualified technician.

9. Are there any recalls or technical service bulletins related to OBDII code B2355 in a 2015 GMC Sierra?

- It is recommended to check with a GMC dealership or online resources for any relevant recalls or technical service bulletins related to this specific OBDII code in your vehicle.

10. Can a DIY enthusiast with basic automotive knowledge repair OBDII code B2355 in a 2015 GMC Sierra?

- While some troubleshooting steps can be performed by a DIY enthusiast, it is recommended to consult a professional technician for proper diagnosis and repair of issues related to the driver seat front vertical position sensor circuit.