B2319 Chrysler Code - Wiper Hi/Low Control Circuit Open
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2319 Chrysler indicates Wiper Hi/Low Control Circuit Open.
- Common causes
- Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2319 Chrysler Description
What are the Possible Causes of the DTC B2319 Chrysler?
- Faulty Wiper Hi/Low Relay
- Wiper Hi/Low Relay harness is open or shorted
- Wiper Hi/Low Relay circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC B2319 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2319 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2319 Chrysler code?
Need more information on how to fix the B2319 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2319 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2319 Chrysler Code
1. What does the OBDII code B2319 mean on a Chrysler vehicle?
The code B2319 indicates an open circuit issue in the Wiper Hi/Low Control Circuit, meaning the system cannot properly control the high and low speeds of the windshield wipers.
2. What are the common symptoms of the B2319 code?
Symptoms typically include wipers not functioning, wipers only operating at one speed, or failure to switch between high and low speeds.
3. What causes the B2319 code to appear?
Common causes include a faulty wiper motor, damaged wiring or connectors in the wiper control circuit, or a malfunctioning wiper switch.
4. Can I still drive my vehicle with the B2319 code?
Yes, but driving without functioning wipers can be unsafe, especially in rainy or snowy conditions. It’s best to address the issue promptly.
5. How do I diagnose the B2319 code?
Start by inspecting the wiring and connectors for damage or corrosion. Then, test the wiper motor and switch for proper operation using a multimeter.
6. What tools are needed to troubleshoot the B2319 code?
You’ll need an OBDII scanner, a multimeter, and basic tools for inspecting and repairing electrical components.
7. How do I fix the B2319 code on my Chrysler?
Repairs might include replacing the wiper motor, repairing or replacing damaged wiring, or replacing a faulty wiper switch.
8. How much does it cost to repair the B2319 code?
Repair costs vary but can range from $50 to $300, depending on whether the issue is a simple wiring repair or requires replacing the wiper motor or switch.
9. Can a dead wiper motor trigger the B2319 code?
Yes, a dead or malfunctioning wiper motor is a common cause of this code, as it disrupts the control circuit.
10. Will clearing the B2319 code with a scanner fix the issue?
Clearing the code will not fix the underlying problem. The issue must be diagnosed and repaired to prevent the code from returning.
Discuss the causes and fixes for B2319 Chrysler OBDII Code
Code B2319 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
