B2316 Jeep Code - Wiper High/Low Control Circuit
Quick Answer
The Body Control Module (BCM) monitors the Wiper High/Low Control Circuit. Common causes include Faulty Wiper High/Low Relay, Wiper High/Low Relay harness is open or shorted, Wiper High/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2316 Jeep indicates Wiper High/Low Control Circuit.
- Common causes
- Common causes include Faulty Wiper High/Low Relay, Wiper High/Low Relay harness is open or shorted, Wiper High/Low Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2316 Jeep Description
What are the Possible Causes of the DTC B2316 Jeep?
- Faulty Wiper High/Low Relay
- Wiper High/Low Relay harness is open or shorted
- Wiper High/Low Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2316 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B2316-15 WIPER HIGH/LOW CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2316 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2316 Jeep code?
Need more information on how to fix the B2316 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2316 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2316 Jeep Code
1. What are the common symptoms of OBDII code B2316 in a Jeep related to the Wiper High/Low Control Circuit?
Symptoms may include the windshield wipers operating at only one speed or not responding to control inputs properly.
2. What are possible causes of the OBDII code B2316 in a Jeep for the Wiper High/Low Control Circuit issue?
Potential causes include a faulty wiper switch, damaged wiring or connectors, a defective wiper motor, or a problem with the wiper control module.
3. How can I diagnose the OBDII code B2316 in a Jeep for the Wiper High/Low Control Circuit problem?
You can use a multimeter to test the continuity of the wiring, check the wiper switch for proper functionality, inspect the wiper motor for any issues, and scan the vehicle's system for specific fault codes.
4. What steps can I take to repair the OBDII code B2316 related to the Wiper High/Low Control Circuit in my Jeep?
Repair actions may involve replacing the wiper switch, repairing or replacing damaged wiring, fixing faulty connectors, replacing the wiper motor, or addressing issues with the wiper control module.
5. Can a DIY enthusiast fix the OBDII code B2316 in a Jeep for the Wiper High/Low Control Circuit?
While some experienced DIYers may be able to diagnose and repair this issue, it's recommended to seek professional help, especially if dealing with electrical components to ensure proper diagnosis and repair.
6. Is it safe to continue driving my Jeep with the OBDII code B2316 related to the Wiper High/Low Control Circuit?
It's not advisable to drive the vehicle with malfunctioning wipers, as it can compromise visibility during adverse weather conditions, potentially leading to safety hazards.
7. How much can I expect to pay for repairs related to the OBDII code B2316 for the Wiper High/Low Control Circuit in a Jeep?
Costs can vary depending on the exact cause of the issue, but expect to pay for parts and labor. Prices range from a few hundred dollars for simple fixes to potentially more for complex repairs involving module replacements.
8. Are there any preventative measures I can take to avoid encountering the OBDII code B2316 in my Jeep for the Wiper High/Low Control Circuit?
Regularly inspecting the wiper system, ensuring proper maintenance, and addressing any issues promptly can help prevent the occurrence of this fault code.
9. Can extreme weather conditions or environmental factors contribute to the OBDII code B2316 in a Jeep for the Wiper High/Low Control Circuit?
Yes, exposure to harsh weather conditions, such as heavy rain, snow, or extreme temperatures, can accelerate wear and tear on wiper components, potentially leading to issues triggering this fault code.
10. How long does it typically take to repair the OBDII code B2316 related to the Wiper High/Low Control Circuit in a Jeep?
The repair duration can vary based on the specific problem and the expertise of the technician. Simple fixes may be completed within a few hours, while more complex issues might require a day or more to diagnose and repair thoroughly.
Discuss the causes and fixes for B2316 Jeep OBDII Code
Code B2316 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
