AutoCodes – Jeep – B2314 Jeep

B2314 Jeep Code - Wiper On/Off Control Circuit High

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2314 Jeep indicates Wiper On/Off Control Circuit High.
Common causes: Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 657

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 07, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2314 Jeep Description

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a short/high condition.

OBDII Code B2314 Jeep - Wiper On/Off Control Circuit High - AutoCodes.com — B2314 Jeep Code - Wiper On/Off Control Circuit High

What does this mean?

What are the Possible Causes of the DTC B2314 Jeep?

Faulty Wiper Motor
Wiper Motor harness is open or shorted
Wiper Motor circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2314 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2314 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2314 Jeep code?

Need more information on how to fix the B2314 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2314 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2314 Jeep Code

1. What are the common symptoms of OBDII code B2314 in a Jeep related to the wiper on/off control circuit?

- Common symptoms include erratic wiper operation, wipers not turning off, or the wipers not responding to control inputs.

2. What are the possible causes of the wiper on/off control circuit high fault code B2314 in a Jeep?

- The code B2314 can be triggered by issues such as a faulty wiper switch, damaged wiring in the wiper circuit, or a malfunctioning wiper motor.

3. How can I diagnose the wiper on/off control circuit high fault in my Jeep when OBDII code B2314 is present?

- To diagnose the issue, you can start by inspecting the wiper switch, checking the wiring harness for any damage, and testing the wiper motor for proper functionality.

4. Can a blown fuse cause OBDII code B2314 to appear in a Jeep's wiper system?

- Yes, a blown fuse in the wiper circuit can lead to the wiper on/off control circuit high fault and trigger code B2314 in a Jeep.

5. What are some repair tips for addressing OBDII code B2314 related to the wiper on/off control circuit high in a Jeep?

- Repair tips include checking and replacing any damaged wiring, testing and potentially replacing the wiper switch or motor, and ensuring proper grounding in the circuit.

6. Is it safe to drive my Jeep with OBDII code B2314 related to the wiper on/off control circuit high?

- It is not recommended to drive your Jeep with wiper control issues as it can impact visibility, especially in adverse weather conditions. Address the issue promptly.

7. Can extreme weather conditions, such as heavy rain or snow, contribute to triggering OBDII code B2314 in a Jeep?

- Yes, extreme weather conditions can potentially exacerbate existing issues in the wiper system and lead to the wiper on/off control circuit high fault code.

8. Will resetting the OBDII system clear the B2314 code related to the wiper on/off control circuit high in my Jeep?

- Resetting the OBDII system may temporarily clear the code, but the underlying issue causing the fault will need to be diagnosed and repaired to prevent the code from reappearing.

9. How can I prevent OBDII code B2314 from recurring in my Jeep's wiper system after repairing the fault?

- Regularly inspecting the wiper system, ensuring proper maintenance, and addressing any issues promptly can help prevent the recurrence of the wiper on/off control circuit high fault.

10. Should I seek professional help to diagnose and repair OBDII code B2314 in my Jeep related to the wiper on/off control circuit high?

- If you are unsure about diagnosing or repairing the wiper control circuit issue triggering code B2314, it is recommended to seek the assistance of a qualified mechanic or automotive technician.