B2313 Jeep Code - Wiper On/Off Control Circuit
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2313 Jeep indicates Wiper On/Off Control Circuit.
- Common causes
- Common causes include Faulty Wiper Motor, Wiper Motor harness is open or shorted, Wiper Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2313 Jeep Description
What are the Possible Causes of the DTC B2313 Jeep?
- Faulty Wiper Motor
- Wiper Motor harness is open or shorted
- Wiper Motor circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC B2313 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2313 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2313 Jeep code?
Need more information on how to fix the B2313 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2313 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2313 Jeep Code
1. What are the common symptoms of OBDII code B2313 in a Jeep related to the Wiper On/Off Control Circuit?
The common symptoms include non-functioning wipers, wipers that operate erratically, or wipers that do not turn off.
2. What are the possible causes of OBDII code B2313 in a Jeep related to the Wiper On/Off Control Circuit?
Possible causes include a faulty wiper switch, damaged wiring or connectors in the wiper system, or a defective wiper motor.
3. How can I diagnose the cause of OBDII code B2313 in my Jeep for the Wiper On/Off Control Circuit?
You can start by inspecting the wiper switch for any visible damage, checking the wiring and connectors for any breaks or corrosion, and testing the wiper motor for proper functionality.
4. Can a blown fuse cause OBDII code B2313 in a Jeep for the Wiper On/Off Control Circuit?
Yes, a blown fuse in the wiper circuit can trigger this code. Check the wiper fuse and replace it if necessary before further diagnosis.
5. What are some repair tips for addressing OBDII code B2313 in a Jeep related to the Wiper On/Off Control Circuit?
Ensure that all electrical connections in the wiper system are secure and free of corrosion, replace a faulty wiper switch or motor if needed, and reset the OBDII code after repairs.
6. Is it safe to continue driving my Jeep with OBDII code B2313 related to the Wiper On/Off Control Circuit?
It is not recommended to drive your Jeep with malfunctioning wipers, as it can compromise your visibility during adverse weather conditions. Promptly address the issue to ensure safe driving.
7. Can extreme weather conditions contribute to triggering OBDII code B2313 in a Jeep for the Wiper On/Off Control Circuit?
Extreme weather conditions, such as heavy rain, snow, or ice, can put additional strain on the wiper system and potentially lead to issues triggering this code.
8. How can I prevent OBDII code B2313 from occurring in the future in my Jeep related to the Wiper On/Off Control Circuit?
Regularly inspect and maintain your Jeep's wiper system, including checking for any signs of wear or damage, to prevent issues that can trigger this OBDII code.
9. Are there any recalls or technical service bulletins related to OBDII code B2313 in Jeeps for the Wiper On/Off Control Circuit?
Check with your local Jeep dealership or visit the manufacturer's website to see if there are any recalls or technical service bulletins related to this specific OBDII code for your vehicle.
10. Can I use a diagnostic scanner to clear OBDII code B2313 related to the Wiper On/Off Control Circuit in my Jeep after making repairs?
Yes, once you have addressed the underlying issue causing the code, you can use a diagnostic scanner to clear the code from the system memory.
Discuss the causes and fixes for B2313 Jeep OBDII Code
Code B2313 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
