AutoCodes – Dodge – B2306 Dodge

B2306 Dodge Code - Front Washer Switch Stuck

Quick Answer

The Wiper/Washer Switch is integral to the Multifunction Switch. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2306 Dodge indicates Front Washer Switch Stuck.
Common causes: Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,019

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 31, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2306 Dodge Description

The Wiper/Washer Switch is integral to the Multifunction Switch. The Multifunction Switch is connected to the left side of the Clockspring/SAS. The Multifunction switch provides the primary controls for the front wiper/rear wiper/washer systems, turn signals and for headlamp high beam selection. The Multifunction Switch communicates with the Steering Angle Sensor (SAS) (integral to the Steering Column Control Module) via the LIN Bus. The SAS then converts this data to a CAN Bus signal and broadcasts the message to the corresponding module on the bus. The Diagnostic Trouble Code (DTC) sets when the Steering Column Control Module (SCCM) detects the Washer Switch is active for greater than 20 seconds.

OBDII Code B2306 Dodge - Front Washer Switch Stuck - AutoCodes.com — B2306 Dodge Code - Front Washer Switch Stuck

What does this mean?

What are the Possible Causes of the DTC B2306 Dodge?

Faulty Multifunction Switch
Multifunction Switch harness is open or shorted
Multifunction Switch circuit poor electrical connection

How to Fix the DTC B2306 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2306 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2306 Dodge code?

Need more information on how to fix the B2306 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2306 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2306 Dodge Code

1. What does the OBDII code B2306 mean for a Dodge vehicle?

B2306 indicates that the front washer switch is stuck, meaning the vehicle's computer has detected a malfunction in the windshield washer switch or its circuit.

2. What are the common symptoms of the B2306 code?

Typical symptoms include the windshield washer system not activating, the washer pump running continuously, or the washer fluid spraying unexpectedly.

3. What causes the B2306 code to appear?

The B2306 code is commonly caused by a faulty washer switch, damaged wiring or connectors in the washer switch circuit, or a shorted washer motor.

4. Can I still drive my Dodge with the B2306 code?

Yes, you can still drive the vehicle, but the windshield washer system may not work properly, which could be a safety issue in poor weather conditions.

5. How do I diagnose the B2306 code?

Start by inspecting the washer switch for physical damage, check the wiring and connectors for corrosion or breaks, and test the switch's functionality using a multimeter.

6. How do I fix the B2306 code?

Repairs may include replacing the washer switch, repairing damaged wiring, or cleaning corroded connectors in the washer circuit.

7. Can a blown fuse trigger the B2306 code?

While a blown fuse might cause the washer system to stop working, it is unlikely to directly trigger the B2306 code, which specifically relates to the washer switch being stuck.

8. How much does it cost to repair the B2306 code?

Repair costs can vary. Replacing a washer switch typically costs between $50 and $150 for parts, plus labor if done by a mechanic.

9. Can I reset the B2306 code without fixing the problem?

The code can be cleared temporarily with an OBDII scanner, but it will likely return unless the underlying issue with the washer switch or circuit is resolved.

10. Is the B2306 code likely to damage other vehicle systems?

No, the B2306 code is specific to the windshield washer system and does not typically affect other systems in the vehicle.