AutoCodes – Chrysler – B2306 Chrysler

B2306 Chrysler Code - Front Washer Switch Stuck

Quick Answer

The Wiper/Washer Switch is integral to the Multifunction Switch. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2306 Chrysler indicates Front Washer Switch Stuck.
Common causes
Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,398
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 31, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B2306 Chrysler Description

The Wiper/Washer Switch is integral to the Multifunction Switch. The Multifunction Switch is connected to the left side of the Clockspring/SAS. The Multifunction switch provides the primary controls for the front wiper/rear wiper/washer systems, turn signals and for headlamp high beam selection. The Multifunction Switch communicates with the Steering Angle Sensor (SAS) (integral to the Steering Column Control Module) via the LIN Bus. The SAS then converts this data to a CAN Bus signal and broadcasts the message to the corresponding module on the bus. The Diagnostic Trouble Code (DTC) sets when the Steering Column Control Module (SCCM) detects the Washer Switch is active for greater than 20 seconds.
OBDII Code B2306 Chrysler - Front Washer Switch Stuck - AutoCodes.com
B2306 Chrysler Code - Front Washer Switch Stuck

What are the Possible Causes of the DTC B2306 Chrysler?

  • Faulty Multifunction Switch
  • Multifunction Switch harness is open or shorted
  • Multifunction Switch circuit poor electrical connection

How to Fix the DTC B2306 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2306 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2306 Chrysler code?

Need more information on how to fix the B2306 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2306 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2306 Chrysler Code

1. What does the OBDII code B2306 mean on a Chrysler?

The code B2306 indicates that the front washer switch in the vehicle is stuck or not functioning properly.

2. What are the symptoms of a B2306 code?

Symptoms may include the windshield washer not activating, the washer running continuously, or the washer switch feeling jammed or unresponsive.

3. What causes the B2306 code to appear?

Common causes include a faulty washer switch, damaged wiring or connectors, or a malfunctioning body control module (BCM).

4. How can I diagnose the B2306 code?

Start by inspecting the washer switch for physical damage or debris, check the wiring and connectors for corrosion or breaks, and use a scan tool to monitor the switch's signal.

5. Can a stuck front washer switch be fixed without replacing it?

Sometimes. Cleaning the switch or removing debris might resolve the issue if the problem is caused by dirt or residue.

6. Does a B2306 code require the washer switch to be replaced?

Not always. The issue could be with the wiring or BCM, so the switch should only be replaced if it's confirmed to be the fault.

7. How much does it cost to fix a B2306 code?

The cost varies depending on the issue. Replacing the washer switch typically costs between $50 and $150, while wiring or BCM repairs may be more expensive.

8. Can I drive with a B2306 code active?

Yes, but you may lose the ability to use your windshield washer system, which can be a safety issue in certain weather conditions.

9. What tools are needed to fix the B2306 code?

You may need a multimeter, a scan tool, and basic hand tools to inspect and repair the washer switch or related components.

10. Will clearing the B2306 code with a scan tool fix the problem?

No, clearing the code will only reset the warning. You must address the underlying issue to prevent the code from returning.

Discuss the causes and fixes for B2306 Chrysler OBDII Code

Code B2306 Chrysler comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play