B2301 RAM Code - Wiper Mode Switch Input Circuit Low
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Cluster detects the Wiper Mode Switch Input circuit voltage is less than the expected value. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2301 RAM indicates Wiper Mode Switch Input Circuit Low.
- Common causes
- Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2301 RAM Description
What are the Possible Causes of the DTC B2301 RAM?
- Faulty Multifunction Switch
- Multifunction Switch harness is open or shorted
- Multifunction Switch circuit poor electrical connection
How to Fix the DTC B2301 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2301 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2301 RAM code?
Need more information on how to fix the B2301 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2301 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2301 RAM Code
1. What does the OBDII code B2301 mean?
B2301 indicates that the Wiper Mode Switch Input Circuit is experiencing a low voltage condition, which may prevent proper operation of the windshield wipers.
2. What are the symptoms of the B2301 code?
Common symptoms include wipers not working, wipers stuck in one mode, or intermittent wiper function failure.
3. What causes the B2301 code to appear?
The code can be caused by a faulty wiper mode switch, damaged wiring or connectors, or a malfunctioning body control module (BCM).
4. Can I drive safely with the B2301 code?
It is not recommended to drive in poor weather conditions with this code, as the wipers may not function properly and compromise visibility.
5. How do you diagnose the B2301 code?
A technician will check the wiper mode switch, inspect the wiring and connectors for damage, and test the voltage and continuity in the circuit.
6. How can I fix the B2301 code?
Repairs may involve replacing the wiper mode switch, repairing damaged wiring, or reprogramming or replacing the body control module if necessary.
7. Is the B2301 code specific to RAM vehicles?
While it is more commonly associated with RAM vehicles, similar issues can occur in other makes and models, but the code may differ.
8. How much does it cost to repair the B2301 code?
Repair costs depend on the exact issue but typically range from $100 to $400, including diagnostics and parts replacement.
9. Can a blown fuse cause the B2301 code?
Yes, a blown fuse in the wiper circuit could lead to insufficient power, potentially triggering the B2301 code.
10. Will clearing the code fix the problem?
Clearing the code may temporarily remove the warning, but the underlying issue must be repaired to prevent it from returning.
Discuss the causes and fixes for B2301 RAM OBDII Code
Code B2301 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
