AutoCodes – Scion – B2271 Scion

B2271 Scion Code - Ignition Hold Monitor Malfunction

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when a malfunction in the Ignition (IG) circuit or IG hold circuit in the Certification ECU (Smart Key ECU Assembly) is detected. Common causes include Faulty Certification ECU (Smart Key ECU Assembly), Certification ECU harness is open or shorted, Certification ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2271 Scion indicates Ignition Hold Monitor Malfunction.
Common causes: Common causes include Faulty Certification ECU (Smart Key ECU Assembly), Certification ECU harness is open or shorted, Certification ECU circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 548

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 10, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2271 Scion Description

This Diagnostic Trouble Code (DTC) is stored when a malfunction in the Ignition (IG) circuit or IG hold circuit in the Certification ECU (Smart Key ECU Assembly) is detected.

OBDII Code B2271 Scion - Ignition Hold Monitor Malfunction - AutoCodes.com — B2271 Scion Code - Ignition Hold Monitor Malfunction

What does this mean?

What are the Possible Causes of the DTC B2271 Scion?

Faulty Certification ECU (Smart Key ECU Assembly)
Certification ECU harness is open or shorted
Certification ECU circuit poor electrical connection

How to Fix the DTC B2271 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2271 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2271 Scion code?

Need more information on how to fix the B2271 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2271 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2271 Scion Code

1. What are the common symptoms of OBDII code B2271 in a Scion related to Ignition Hold Monitor Malfunction?

The common symptoms include the Check Engine Light being illuminated, difficulty starting the vehicle, and potential issues with engine misfires.

2. What are the possible causes of the Ignition Hold Monitor Malfunction error code B2271 in a Scion?

Possible causes include a faulty ignition coil, damaged spark plugs, issues with the ignition system, or a problem with the Engine Control Module (ECM).

3. How can I diagnose the Ignition Hold Monitor Malfunction error code B2271 in my Scion?

Diagnosis usually involves using an OBDII scanner to retrieve the specific fault code, checking the ignition system components for damage, and performing a thorough inspection of the ECM.

4. Can a DIY enthusiast repair the Ignition Hold Monitor Malfunction error code B2271 in a Scion?

While some basic troubleshooting like checking spark plugs and ignition coils can be done by a DIY enthusiast, diagnosing and repairing complex issues with the ECM may require professional assistance.

5. Are there any tips for repairing the Ignition Hold Monitor Malfunction error code B2271 in a Scion?

Ensure all ignition system components are in good condition, follow proper diagnostic procedures, and consider seeking help from a certified mechanic for a thorough inspection and repair.

6. Is it safe to continue driving my Scion with the B2271 code related to Ignition Hold Monitor Malfunction?

It is not recommended to continue driving your vehicle with this code as it can lead to potential engine performance issues and further damage if left unresolved.

7. How much does it typically cost to repair the Ignition Hold Monitor Malfunction error code B2271 in a Scion?

The cost of repair can vary depending on the specific issue causing the code, but it is advisable to budget for diagnostic fees, replacement parts, and labor charges from a mechanic.

8. Can resetting the OBDII system clear the B2271 error code related to Ignition Hold Monitor Malfunction in a Scion?

Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the problem is detected again.

9. Will the Ignition Hold Monitor Malfunction error code B2271 cause permanent damage to my Scion if not fixed immediately?

While immediate damage may not occur, unresolved issues related to this code can lead to decreased engine performance, reduced fuel efficiency, and potential long-term damage if left untreated.

10. How often should I have my Scion inspected for potential issues related to the Ignition Hold Monitor Malfunction error code B2271?

Regular maintenance and inspections every 6-12 months are recommended to catch any potential issues early and prevent the occurrence of this error code.