B2255 Jeep Code - Occupant Restrain Controller Roll Over Feature Disable
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2255 Jeep indicates Occupant Restrain Controller Roll Over Feature Disable.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2255 Jeep Description
This Diagnostic Trouble Code (DTC) sets when the ORC detects the roll over feature has been disabled contrary to the correct vehicle configuration or has been disabled with the scan tool. This DTC can only be Active.
What are the Possible Causes of the DTC B2255 Jeep?
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2255 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2255 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2255 Jeep code?
Need more information on how to fix the B2255 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2255 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2255 Jeep Code
1. What does the OBDII code B2255 for Jeep mean?
The code B2255 for Jeep refers to the Occupant Restrain Controller Roll Over Feature Disable.
2. What are common symptoms of the B2255 code in a Jeep?
Common symptoms of the B2255 code may include the airbag warning light illuminating on the dashboard and potential issues with the occupant restraint system.
3. What can cause the B2255 code to trigger in a Jeep?
The B2255 code in a Jeep may be triggered by a faulty occupant restraint controller, wiring issues, or a malfunction in the roll-over feature system.
4. How serious is the B2255 fault code in a Jeep?
The B2255 fault code should be taken seriously as it relates to the occupant restraint system, which is crucial for passenger safety in the event of a collision.
5. How can I diagnose the B2255 code in my Jeep?
Diagnosing the B2255 code may require using a professional OBDII scanner to retrieve the code and then performing a thorough inspection of the occupant restraint system components.
6. Can I drive my Jeep with the B2255 code present?
It is not recommended to drive your Jeep with the B2255 code present, as it may indicate potential safety issues with the occupant restraint system.
7. How can I repair the B2255 code in my Jeep?
Repairing the B2255 code may involve replacing the occupant restraint controller, repairing any damaged wiring, or addressing any issues with the roll-over feature system.
8. Will the B2255 code reset itself in a Jeep?
The B2255 code may not reset itself automatically. After completing repairs, it is recommended to clear the code using an OBDII scanner.
9. Can I fix the B2255 code in my Jeep myself?
While diagnosing the B2255 code may be possible for some DIY enthusiasts, repairing the issue may require specialized tools and expertise, so it's recommended to consult a professional mechanic.
10. How much does it cost to repair the B2255 code in a Jeep?
The cost of repairing the B2255 code in a Jeep can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It's best to obtain quotes from reputable mechanics or dealerships.
Discuss the causes and fixes for B2255 Jeep OBDII Code
Code B2255 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
