B2255 Dodge Code - Occupant Restrain Controller Roll Over Feature Disable
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2255 Dodge indicates Occupant Restrain Controller Roll Over Feature Disable.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2255 Dodge Description
This Diagnostic Trouble Code (DTC) sets when the ORC detects the roll over feature has been disabled contrary to the correct vehicle configuration or has been disabled with the scan tool. This DTC can only be Active.
What are the Possible Causes of the DTC B2255 Dodge?
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2255 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2255 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2255 Dodge code?
Need more information on how to fix the B2255 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2255 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2255 Dodge Code
1. What are the common symptoms of OBDII code B2255 in a Dodge related to the Occupant Restrain Controller Roll Over Feature Disable?
- The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's restraint system.
2. What are the possible causes of OBDII code B2255 in a Dodge triggering the Occupant Restrain Controller Roll Over Feature Disable?
- The code B2255 can be triggered by a malfunction in the occupant restrain controller, wiring issues, or a faulty roll over sensor in the vehicle.
3. How can I diagnose the OBDII code B2255 in a Dodge associated with the Occupant Restrain Controller Roll Over Feature Disable?
- To diagnose the issue, it is recommended to use a diagnostic scanner to retrieve the specific fault codes and perform a detailed inspection of the restraint system components.
4. What are some repair tips for fixing OBDII code B2255 in a Dodge related to the Occupant Restrain Controller Roll Over Feature Disable?
- Repair tips may include checking and repairing any damaged wiring, replacing the occupant restrain controller if necessary, and ensuring proper calibration of the roll over sensor.
5. Can I safely drive my Dodge with OBDII code B2255 triggering the Occupant Restrain Controller Roll Over Feature Disable?
- It is not recommended to drive the vehicle with the airbag warning light on, as it indicates potential issues with the restraint system that could affect safety in the event of a collision.
6. How much does it typically cost to repair OBDII code B2255 in a Dodge associated with the Occupant Restrain Controller Roll Over Feature Disable?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing components like the occupant restrain controller or fixing wiring problems, which can range from a few hundred to over a thousand dollars.
7. Is it possible to reset the OBDII code B2255 in a Dodge related to the Occupant Restrain Controller Roll Over Feature Disable without repairing the issue?
- While clearing the fault code may temporarily turn off the warning light, it is crucial to address the root cause of the problem to ensure the proper functioning of the restraint system.
8. How important is it to fix OBDII code B2255 in a Dodge associated with the Occupant Restrain Controller Roll Over Feature Disable promptly?
- It is essential to address the issue promptly to ensure the proper operation of the vehicle's restraint system, which is crucial for occupant safety in the event of a collision.
9. Can a DIY enthusiast with automotive knowledge repair OBDII code B2255 in a Dodge related to the Occupant Restrain Controller Roll Over Feature Disable?
- While some repairs may be possible for experienced DIY enthusiasts, diagnosing and fixing issues related to the restraint system and airbags should be approached with caution and may require professional assistance.
10. Are there any recalls or technical service bulletins related to OBDII code B2255 in a Dodge involving the Occupant Restrain Controller Roll Over Feature Disable?
- It is recommended to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins related to the specific OBDII code B2255 in your Dodge model to stay informed about potential issues and solutions.
Discuss the causes and fixes for B2255 Dodge OBDII Code
Code B2255 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
