B2255 Chrysler Code - Occupant Restrain Controller Roll Over Feature Disable
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2255 Chrysler indicates Occupant Restrain Controller Roll Over Feature Disable.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2255 Chrysler Description
This Diagnostic Trouble Code (DTC) sets when the ORC detects the roll over feature has been disabled contrary to the correct vehicle configuration or has been disabled with the scan tool. This DTC can only be Active.
What are the Possible Causes of the DTC B2255 Chrysler?
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2255 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2255 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2255 Chrysler code?
Need more information on how to fix the B2255 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2255 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2255 Chrysler Code
1. What is the OBDII code B2255 Chrysler related to the Occupant Restrain Controller Roll Over Feature Disable?
The B2255 code indicates an issue with the Occupant Restrain Controller Roll Over Feature Disable system in a Chrysler vehicle.
2. What are the common symptoms of a B2255 Chrysler code?
Common symptoms of the B2255 code may include the airbag warning light staying on, the Roll Over Feature Disable system not functioning properly, and possible diagnostic trouble codes related to the restraint system.
3. What are the potential causes of the B2255 code in a Chrysler vehicle?
The B2255 code can be triggered by various factors, including a faulty Occupant Restrain Controller module, damaged wiring or connectors, a malfunctioning roll over sensor, or issues with the vehicle's computer system.
4. How can I diagnose and repair a B2255 Chrysler code?
Diagnosing the B2255 code typically involves using a scan tool to retrieve the code and then inspecting the Occupant Restrain Controller system components for any visible damage or issues. Repairing the problem may involve replacing damaged components, repairing wiring harnesses, or reprogramming the vehicle's computer system.
5. Can I drive my Chrysler with a B2255 code?
It is not recommended to drive your Chrysler with a B2255 code present, as it indicates a potential issue with the vehicle's restraint system that could affect occupant safety in the event of a rollover or collision.
6. How much does it cost to repair a B2255 Chrysler code?
The cost of repairing a B2255 code can vary depending on the specific cause of the issue, the extent of the damage, and labor rates in your area. It is advisable to consult with a qualified mechanic or dealership for an accurate estimate.
7. Is the B2255 code a serious problem in a Chrysler vehicle?
Yes, the B2255 code is considered a serious issue as it relates to the vehicle's Occupant Restrain Controller system, which is essential for proper airbag deployment and occupant safety in the event of a rollover or crash.
8. Can I reset the B2255 code in my Chrysler without fixing the underlying issue?
While you may be able to clear the B2255 code using a scan tool, it is crucial to address the root cause of the problem to ensure the safety and functionality of the vehicle's restraint system.
9. How often does the B2255 Chrysler code occur in vehicles?
The B2255 code can occur in Chrysler vehicles due to various factors, including age, wear and tear, and environmental conditions. Regular maintenance and inspections can help prevent the code from appearing.
10. Can a DIY enthusiast repair a B2255 code on a Chrysler vehicle?
Repairing a B2255 code on a Chrysler vehicle may require advanced diagnostic tools and technical knowledge. It is recommended to consult with a professional mechanic or dealership for proper diagnosis and repair to ensure the safety of the vehicle.
Discuss the causes and fixes for B2255 Chrysler OBDII Code
Code B2255 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
