B2220 2018 Toyota RAV4 Code - Back Door Motor Circuit
Quick Answer
The Power Back Door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the back door control switch or the power back door button on an electrical key transmitter sub-assembly or door control transmitter. Common causes include Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH), Power Back Door Unit Assembly Left or Right harness is open or shorted, Power Back Door Unit Assembly Left or Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2220 2018 Toyota RAV4 indicates Back Door Motor Circuit.
- Common causes
- Common causes include Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH), Power Back Door Unit Assembly Left or Right harness is open or shorted, Power Back Door Unit Assembly Left or Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2220 2018 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) is output when the Multiplex Network Door ECU detects a malfunction in the motor built into the Power Back Door (PBD) Unit Assembly set Left (LH) or Right (RH).
What are the Possible Causes of the DTC B2220 2018 Toyota RAV4?
- Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH)
- Power Back Door Unit Assembly Left or Right harness is open or shorted
- Power Back Door Unit Assembly Left or Right circuit poor electrical connection
- Faulty Multiplex Network Door ECU
How to Fix the DTC B2220 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2220 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2220 2018 Toyota RAV4 code?
Need more information on how to fix the B2220 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2220 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2220 2018 Toyota RAV4 Code
1. What does OBDII code B2220 mean on a 2018 Toyota RAV4?
Code B2220 indicates an issue with the back door motor circuit, specifically a malfunction or disruption in the motor that controls the rear liftgate.
2. What are the symptoms of code B2220 in a 2018 Toyota RAV4?
Common symptoms include the rear liftgate not opening or closing properly, unusual noises from the liftgate motor, or the liftgate being stuck in one position.
3. What causes code B2220 in a 2018 Toyota RAV4?
The most common causes are a faulty back door motor, damaged wiring or connectors in the motor circuit, or a malfunctioning back door control module.
4. Can I drive my 2018 Toyota RAV4 with code B2220 active?
Yes, you can still drive the vehicle, but the back door functionality may be limited or inoperable, which can be inconvenient for loading and unloading.
5. How do I diagnose code B2220 on a 2018 Toyota RAV4?
Start by inspecting the back door motor, checking for loose or damaged wiring, and testing the motor circuit with a multimeter. A scan tool can also help confirm the issue.
6. How do I fix code B2220 on a 2018 Toyota RAV4?
Repairs may include replacing the back door motor, repairing damaged wiring or connectors, or reprogramming or replacing the back door control module.
7. How much does it cost to fix code B2220 in a 2018 Toyota RAV4?
Repair costs can vary, but replacing the back door motor typically costs between $200 and $500, including parts and labor. Wiring repairs may cost less.
8. Can a faulty back door control module trigger code B2220?
Yes, a malfunctioning back door control module can cause this code by failing to properly communicate with or control the motor circuit.
9. Is code B2220 a common issue in the 2018 Toyota RAV4?
While not extremely common, issues with the back door motor circuit can occur, especially in vehicles frequently using the power liftgate feature.
10. Can clearing the code B2220 fix the problem in a 2018 Toyota RAV4?
Clearing the code may temporarily reset the system, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for B2220 2018 Toyota RAV4 OBDII Code
Code B2220 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
