B2220 2013 Toyota RAV4 Code - Back Door Motor Circuit
Quick Answer
The Power Back Door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the back door control switch or the power back door button on an electrical key transmitter sub-assembly or door control transmitter. Common causes include Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH), Power Back Door Unit Assembly Left or Right harness is open or shorted, Power Back Door Unit Assembly Left or Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2220 2013 Toyota RAV4 indicates Back Door Motor Circuit.
- Common causes
- Common causes include Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH), Power Back Door Unit Assembly Left or Right harness is open or shorted, Power Back Door Unit Assembly Left or Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2220 2013 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) is output when the Multiplex Network Door ECU detects a malfunction in the motor built into the Power Back Door (PBD) Unit Assembly set Left (LH) or Right (RH).
What are the Possible Causes of the DTC B2220 2013 Toyota RAV4?
- Faulty Power Back Door (PBD) Unit Assembly Left (LH) or Right (RH)
- Power Back Door Unit Assembly Left or Right harness is open or shorted
- Power Back Door Unit Assembly Left or Right circuit poor electrical connection
- Faulty Multiplex Network Door ECU
How to Fix the DTC B2220 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2220 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2220 2013 Toyota RAV4 code?
Need more information on how to fix the B2220 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2220 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2220 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B2220 in a 2013 Toyota RAV4?
The common symptoms include the back door not opening or closing properly, unusual noises coming from the back door motor, and failure of the back door to lock or unlock.
2. What are the possible causes of OBDII code B2220 in a 2013 Toyota RAV4?
Possible causes of this code may include a faulty back door motor, damaged wiring or connectors in the back door motor circuit, or a malfunctioning control module.
3. How can I diagnose OBDII code B2220 in my 2013 Toyota RAV4?
Diagnosis typically involves using a scan tool to retrieve the trouble code, inspecting the back door motor and its connections for any visible damage, and testing the circuits for proper voltage and continuity.
4. Can I still drive my 2013 Toyota RAV4 with OBDII code B2220?
It is not recommended to drive the vehicle with this code as it can affect the operation of the back door, posing a safety risk. It's best to address the issue promptly.
5. How can I repair OBDII code B2220 in my 2013 Toyota RAV4?
Repair methods may include replacing the back door motor, repairing or replacing damaged wiring or connectors, or reprogramming the control module if necessary.
6. Is it safe to attempt DIY repairs for OBDII code B2220 in a 2013 Toyota RAV4?
While some basic inspections like checking for loose connections can be done by DIY enthusiasts, it's recommended to consult a professional for proper diagnosis and repair to ensure safety and accuracy.
7. How much does it cost to fix OBDII code B2220 in a 2013 Toyota RAV4?
The cost of fixing this code can vary depending on the exact cause and the labor rates in your area. It's advisable to get multiple quotes from reputable repair shops.
8. Can resetting the OBDII system clear OBDII code B2220 in a 2013 Toyota RAV4?
Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It's important to diagnose and fix the root cause.
9. Will OBDII code B2220 cause my 2013 Toyota RAV4 to fail an emissions test?
Yes, this code can potentially cause your vehicle to fail an emissions test as it signifies a fault in the back door motor circuit, which can impact the overall performance of the vehicle.
10. How long does it usually take to repair OBDII code B2220 in a 2013 Toyota RAV4?
The repair time can vary based on the exact cause of the code and the complexity of the repair needed. It's best to consult with a mechanic for a more accurate estimate of the repair duration.
Discuss the causes and fixes for B2220 2013 Toyota RAV4 OBDII Code
Code B2220 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
