B2208 RAM Code - Occupant Restraint Controller Internal 2
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2208 RAM indicates Occupant Restraint Controller Internal 2.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2208 RAM Description
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.
What are the Possible Causes of the DTC B2208 RAM?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B2208 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2208 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2208 RAM code?
Need more information on how to fix the B2208 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2208 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2208 RAM Code
1. What does the OBDII code B2208 mean in a RAM vehicle?
The B2208 code indicates an "Occupant Restraint Controller Internal 2" fault, signaling an internal issue with the occupant restraint controller, part of the vehicle's airbag system.
2. What are the common symptoms of the B2208 code in a RAM?
Symptoms often include an illuminated airbag warning light, potential airbag system deactivation, and stored trouble codes in the vehicle's diagnostic system.
3. What causes the B2208 code to appear in a RAM vehicle?
The code is typically caused by a malfunction or internal fault in the occupant restraint controller, electrical wiring issues, or software corruption.
4. Can the B2208 code affect airbag deployment?
Yes, this code can prevent the airbags from deploying correctly in the event of a collision, compromising vehicle safety.
5. How is the B2208 code diagnosed in a RAM?
A professional will use a diagnostic scanner to read the code, inspect the occupant restraint controller, and check related wiring and connections for faults.
6. Can you clear the B2208 code without repairing the issue?
Clearing the code without addressing the root cause is not recommended, as the issue will likely return and may compromise safety.
7. How can the B2208 code be fixed in a RAM vehicle?
Repairs may include replacing the occupant restraint controller, repairing damaged wiring or connectors, and updating the controller’s software if needed.
8. Is it safe to drive a RAM vehicle with the B2208 code?
Driving with this code is not advised, as it can disable the airbag system, increasing the risk of injury in an accident.
9. How much does it cost to repair the B2208 code in a RAM?
Costs vary depending on the repair needed, but replacing an occupant restraint controller typically ranges from $300 to $1,000, including parts and labor.
10. Can a B2208 code be a result of a dead battery or voltage issues?
Yes, low voltage or a dead battery can sometimes cause internal faults in electronic modules, including the occupant restraint controller.
Discuss the causes and fixes for B2208 RAM OBDII Code
Code B2208 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
