B2208 Dodge Code - Occupant Restraint Controller Internal 2
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2208 Dodge indicates Occupant Restraint Controller Internal 2.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2208 Dodge Description
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.
What are the Possible Causes of the DTC B2208 Dodge?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B2208 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2208 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2208 Dodge code?
Need more information on how to fix the B2208 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2208 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2208 Dodge Code
1. What does the OBDII code B2208 mean on a Dodge?
The B2208 code indicates an "Occupant Restraint Controller Internal 2" fault, meaning the vehicle's Occupant Restraint Controller (ORC) has detected an internal error.
2. What are the symptoms of the B2208 code in a Dodge vehicle?
Common symptoms include the airbag warning light illuminating on the dashboard and the airbag system being disabled.
3. What causes the B2208 code to appear?
The code is typically caused by a malfunction within the Occupant Restraint Controller (ORC), software corruption, electrical issues such as damaged wiring or connectors, or a failed ORC module.
4. Is it safe to drive with the B2208 code active?
No, it is not safe to drive with this code active, as the airbag system may not function properly in the event of a collision.
5. How is the B2208 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the ORC module, check for damaged wiring or connectors, and verify any relevant software updates.
6. Can the B2208 code be fixed by resetting the system?
Resetting the system may temporarily clear the code, but the underlying issue must be addressed for a permanent fix.
7. How do you repair the B2208 code in a Dodge?
Repairs may include replacing the Occupant Restraint Controller module, repairing damaged wiring or connectors, or reprogramming the module if applicable.
8. How much does it cost to fix the B2208 code on a Dodge?
Repair costs vary but may range from $300 to $1,000, depending on whether the ORC module needs replacement or other repairs are required.
9. Can the B2208 code trigger accidentally after an airbag deployment?
Yes, if the airbags have deployed, the ORC module may need to be replaced or reprogrammed, which can trigger this code.
10. Do I need a professional to fix the B2208 code?
Yes, it is recommended to have a trained technician repair this issue due to the complexity of the airbag system and safety concerns.
Discuss the causes and fixes for B2208 Dodge OBDII Code
Code B2208 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
