AutoCodes – Dodge – B2207 Dodge

B2207 Dodge Code - Occupant Restraint Controller Internal 1

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2207 Dodge indicates Occupant Restraint Controller Internal 1.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,915

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2207 Dodge Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.

OBDII Code B2207 Dodge - Occupant Restraint Controller Internal 1 - AutoCodes.com — B2207 Dodge Code - Occupant Restraint Controller Internal 1

What does this mean?

What are the Possible Causes of the DTC B2207 Dodge?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B2207 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2207 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2207 Dodge code?

Need more information on how to fix the B2207 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2207 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2207 Dodge Code

1. What does OBDII code B2207 for Dodge mean?

The B2207 code indicates a problem with the Occupant Restraint Controller Internal 1 in a Dodge vehicle.

2. What are the common symptoms of OBDII code B2207 in a Dodge?

Common symptoms of code B2207 may include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.

3. What are the possible causes of OBDII code B2207 in a Dodge?

Potential causes of code B2207 can include a malfunctioning Occupant Restraint Controller, wiring issues, faulty sensors, or a problem with the airbag system itself.

4. How do I diagnose OBDII code B2207 in my Dodge?

Diagnosing code B2207 typically involves using an OBDII scanner to retrieve the code, inspecting the airbag system components, checking wiring connections, and performing further testing as needed.

5. Can I continue driving my Dodge with OBDII code B2207 present?

It is not recommended to drive your Dodge with the B2207 code active, as it indicates a potential issue with the airbag system that could affect its proper operation in the event of a collision.

6. How can I repair OBDII code B2207 in my Dodge?

Repairing code B2207 may involve addressing the specific cause of the issue, which could include replacing the Occupant Restraint Controller, repairing wiring faults, or fixing sensor problems within the airbag system.

7. Is resetting the OBDII code B2207 sufficient to fix the issue in my Dodge?

Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing code B2207. Proper diagnosis and repair are necessary to address the issue effectively.

8. Can a DIY enthusiast fix OBDII code B2207 in a Dodge?

While some basic troubleshooting steps can be performed by DIY enthusiasts, diagnosing and repairing code B2207 may require specialized tools and expertise, so it is recommended to consult a professional mechanic.

9. Will fixing OBDII code B2207 affect my Dodge's safety features?

Fixing code B2207 is crucial for ensuring the proper functioning of the airbag system in your Dodge, which is a critical safety feature designed to protect occupants in the event of a collision.

10. How much does it cost to repair OBDII code B2207 in a Dodge?

The cost of repairing code B2207 can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain a diagnosis from a mechanic to determine the exact repair cost.