AutoCodes – Chrysler – B2207 Chrysler

B2207 Chrysler Code - Occupant Restraint Controller Internal 1

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2207 Chrysler indicates Occupant Restraint Controller Internal 1.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,391

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2207 Chrysler Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.

OBDII Code B2207 Chrysler - Occupant Restraint Controller Internal 1 - AutoCodes.com — B2207 Chrysler Code - Occupant Restraint Controller Internal 1

What does this mean?

What are the Possible Causes of the DTC B2207 Chrysler?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B2207 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2207 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2207 Chrysler code?

Need more information on how to fix the B2207 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2207 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2207 Chrysler Code

1. What are the common symptoms of OBDII code B2207 in a Chrysler vehicle?

The common symptoms of OBDII code B2207 in a Chrysler vehicle include the airbag warning light illuminating on the dashboard, potential non-deployment of airbags in the event of a crash, and possible loss of communication with the occupant restraint controller.

2. What causes OBDII code B2207 to trigger in a Chrysler vehicle?

OBDII code B2207 in a Chrysler vehicle is typically triggered by a fault in the occupant restraint controller internal 1 circuit. This can be caused by issues such as damaged wiring, a faulty control module, or a poor connection within the restraint system.

3. How can I diagnose OBDII code B2207 in my Chrysler vehicle?

Diagnosing OBDII code B2207 in a Chrysler vehicle involves using a diagnostic scanner to retrieve the specific fault code. From there, a thorough inspection of the occupant restraint system, including checking wiring connections and the controller module, is necessary to pinpoint the exact cause of the issue.

4. Can I drive my Chrysler vehicle with OBDII code B2207 present?

It is not recommended to drive your Chrysler vehicle with OBDII code B2207 present, as this indicates a potential issue with the occupant restraint system. Driving with this fault could compromise the safety of the vehicle occupants in the event of a collision.

5. How can I repair OBDII code B2207 in my Chrysler vehicle?

Repairing OBDII code B2207 in a Chrysler vehicle may involve addressing the specific cause of the fault, such as repairing damaged wiring, replacing a faulty occupant restraint controller, or fixing poor connections. It is recommended to consult a professional mechanic for proper diagnosis and repair.

6. Is OBDII code B2207 a serious issue in a Chrysler vehicle?

OBDII code B2207 should be taken seriously in a Chrysler vehicle, as it pertains to the occupant restraint system responsible for airbag deployment in the event of a crash. Ignoring this code could compromise the safety of the vehicle occupants.

7. Can resetting the OBDII system clear code B2207 in a Chrysler vehicle?

Resetting the OBDII system may temporarily clear the code B2207 in a Chrysler vehicle, but if the underlying issue in the occupant restraint system is not addressed, the code is likely to reappear. It is important to diagnose and repair the root cause of the problem.

8. How much does it cost to fix OBDII code B2207 in a Chrysler vehicle?

The cost to fix OBDII code B2207 in a Chrysler vehicle can vary depending on the specific cause of the fault and the required repairs. Costs may include labor charges for diagnosis and repair, as well as the price of any replacement parts needed.

9. Can OBDII code B2207 be triggered by a loose connection in a Chrysler vehicle?

Yes, OBDII code B2207 in a Chrysler vehicle can be triggered by a loose or poor connection in the occupant restraint system. Checking and tightening all wiring connections is a good initial step in addressing this fault code.

10. Will OBDII code B2207 affect the overall performance of a Chrysler vehicle?

OBDII code B2207 is related to the occupant restraint system and is unlikely to affect the overall performance of a Chrysler vehicle in terms of driving dynamics or engine function. However, it is crucial for the safety of the vehicle occupants and should be addressed promptly.