B2206 Chrysler Code - Current VIN Missing/Mismatch
Quick Answer
The Vehicle Identification Number (VIN) stored in the Radio does not match the VIN stored in the Body Control Module (BCM)/Powertrain Control Module (PCM). Common causes include Radio swapped from a different vehicle. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2206 Chrysler indicates Current VIN Missing/Mismatch.
- Common causes
- Common causes include Radio swapped from a different vehicle.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2206 Chrysler Description
What are the Possible Causes of the DTC B2206 Chrysler?
- Radio swapped from a different vehicle
How to Fix the DTC B2206 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2206 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2206 Chrysler code?
Need more information on how to fix the B2206 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2206 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2206 Chrysler Code
1. What does the OBDII code B2206 mean on a Chrysler vehicle?
The B2206 code indicates a "Current VIN Missing/Mismatch," meaning the vehicle's electronic control module (ECM) has detected an issue with the VIN stored in the system.
2. What are the common symptoms of the B2206 code?
Symptoms may include the check engine light illuminating, issues with vehicle diagnostics, or failure to pass emissions tests.
3. What causes the B2206 code to appear?
The code is typically caused by a mismatch between the VIN in the ECM and other modules, a corrupted VIN in the ECM, or an improperly installed or replaced module.
4. Can the B2206 code affect vehicle performance?
In most cases, this code does not affect performance but may cause issues with compliance or diagnostics.
5. How is the B2206 code diagnosed?
A technician will scan the ECM and other modules to verify the stored VINs, check for recent module replacements, and ensure proper programming.
6. What repairs are needed to fix the B2206 code?
Repairs may include reprogramming or updating the ECM with the correct VIN, replacing a faulty module, or addressing wiring or communication issues.
7. Can a battery replacement trigger the B2206 code?
It’s unlikely, but power interruptions during module updates or improper reconnections could contribute to VIN-related errors.
8. Is it safe to drive with the B2206 code active?
Yes, it is generally safe to drive, but the issue should be addressed to avoid diagnostic or compliance problems.
9. How much does it cost to fix the B2206 code?
Costs vary depending on the needed repair, but reprogramming the ECM typically ranges from $100 to $300.
10. Can I clear the B2206 code without fixing the problem?
Clearing the code without resolving the underlying issue may cause it to reappear and could lead to complications during inspections or diagnostics.
Discuss the causes and fixes for B2206 Chrysler OBDII Code
Code B2206 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
