AutoCodes – Chrysler – B2188 Chrysler

B2188 Chrysler Code - Ignition Start Control Circuit Low

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Ignition Start Control Circuit. Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2188 Chrysler indicates Ignition Start Control Circuit Low.
Common causes: Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 755

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2188 Chrysler Description

The Totally Integrated Power Module (TIPM) monitors the Ignition Start Control Circuit. The Diagnostic Trouble Code (DTC) is set when the TIPM detects a short to ground condition in the Fused Ignition Switch Output (Start) circuit.

OBDII Code B2188 Chrysler - Ignition Start Control Circuit Low - AutoCodes.com — B2188 Chrysler Code - Ignition Start Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC B2188 Chrysler?

Faulty Ignition Switch
Ignition Switch harness is open or shorted
Ignition Switch circuit poor electrical connection
Faulty Powertrain Control Module (PCM)
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2188 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2188 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2188 Chrysler code?

Need more information on how to fix the B2188 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2188 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2188 Chrysler Code

1. What are the common symptoms of OBDII code B2188 in a Chrysler related to the Ignition Start Control Circuit Low?

- Common symptoms include difficulty starting the vehicle, intermittent starting issues, and possible stalling while driving.

2. What are some possible causes of OBDII code B2188 in a Chrysler indicating Ignition Start Control Circuit Low?

- Potential causes may include a faulty ignition switch, damaged wiring or connectors in the ignition system, or a malfunctioning control module.

3. How can I diagnose the Ignition Start Control Circuit Low issue indicated by code B2188 in my Chrysler?

- A thorough inspection of the ignition system, including checking the ignition switch, wiring, and connectors, as well as testing the control module, may help diagnose the problem.

4. Can a DIY enthusiast repair OBDII code B2188 related to Ignition Start Control Circuit Low in a Chrysler?

- Depending on the exact cause, DIY repairs like checking and replacing damaged wires or connectors may be possible, but complex issues may require professional diagnosis and repair.

5. Is it safe to continue driving my Chrysler with OBDII code B2188 pointing to Ignition Start Control Circuit Low?

- It is not recommended to drive the vehicle with this issue unresolved, as it can lead to more serious starting or stalling problems, potentially leaving you stranded.

6. How much does it typically cost to repair OBDII code B2188 associated with Ignition Start Control Circuit Low in a Chrysler?

- Repair costs can vary widely depending on the exact cause of the issue, but it's advisable to budget for diagnostic fees, parts replacement, and labor costs.

7. Will resetting the OBDII code B2188 related to Ignition Start Control Circuit Low in my Chrysler make the issue go away?

- Resetting the code may temporarily clear the warning light, but it won't fix the underlying problem causing the Ignition Start Control Circuit Low issue.

8. Can extreme weather conditions impact the occurrence of OBDII code B2188 indicating Ignition Start Control Circuit Low in a Chrysler?

- Yes, extreme temperatures or moisture can potentially exacerbate issues in the ignition system, leading to intermittent starting problems associated with this code.

9. Are there any preventative maintenance steps I can take to avoid encountering OBDII code B2188 related to Ignition Start Control Circuit Low in my Chrysler?

- Regularly checking and maintaining the ignition system components, including the switch, wiring, and connectors, can help prevent issues leading to this OBDII code.

10. How urgent is it to address OBDII code B2188 signaling Ignition Start Control Circuit Low in a Chrysler once it appears?

- It's advisable to address this issue promptly to avoid potential starting or stalling problems, which can impact your vehicle's drivability and safety.