B2105 Jeep Code - Ignition Unlock Run/Start Control Circuit High
Quick Answer
The Front Control Module monitors the Ignition Unlock Run/Start Control Circuit. Common causes include Faulty Shifter Lever Assembly, Shifter Lever Assembly harness is open or shorted, Shifter Lever Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2105 Jeep indicates Ignition Unlock Run/Start Control Circuit High.
- Common causes
- Common causes include Faulty Shifter Lever Assembly, Shifter Lever Assembly harness is open or shorted, Shifter Lever Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2105 Jeep Description
What are the Possible Causes of the DTC B2105 Jeep?
- Faulty Shifter Lever Assembly
- Shifter Lever Assembly harness is open or shorted
- Shifter Lever Assembly circuit poor electrical connection
- Faulty Front Control Module (FCM)
How to Fix the DTC B2105 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2105 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2105 Jeep code?
Need more information on how to fix the B2105 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2105 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2105 Jeep Code
1. What does the OBDII code B2105 mean on a Jeep?
The B2105 code indicates an issue with the Ignition Unlock Run/Start Control Circuit, specifically that the circuit is reading a voltage higher than expected.
2. What are the common symptoms of the B2105 code in a Jeep?
Symptoms may include the inability to start the vehicle, the ignition key not turning, dashboard warning lights, or intermittent starting issues.
3. What causes the B2105 code to appear on a Jeep?
Common causes include a faulty ignition switch, damaged wiring or connectors, a short circuit, or a malfunctioning ignition lock control module.
4. Can I drive my Jeep with the B2105 code active?
It’s not recommended, as the code could cause starting issues or electrical malfunctions that may leave you stranded.
5. How is the B2105 code diagnosed on a Jeep?
A technician will use a diagnostic scanner to confirm the code, inspect the ignition switch, check wiring and connectors, and test the ignition control module for faults.
6. How do I fix the B2105 code in my Jeep?
Repairs may involve replacing the ignition switch, repairing damaged wiring, cleaning or reconnecting corroded connectors, or replacing the ignition control module.
7. Can a weak battery cause the B2105 code in a Jeep?
While unlikely, a weak battery can cause electrical issues that may indirectly contribute to the code. Ensure your battery is in good condition before further diagnostics.
8. How much does it cost to repair the B2105 code on a Jeep?
Repair costs vary depending on the issue but typically range from $100 to $500, depending on whether the ignition switch or control module needs replacement.
9. Can I clear the B2105 code without fixing the problem?
Clearing the code without addressing the root cause will likely make it return, and the underlying issue may worsen over time.
10. Is the B2105 code specific to Jeep vehicles?
No, the B2105 code can appear on other vehicles with similar ignition control systems, although the repair process may vary.
Discuss the causes and fixes for B2105 Jeep OBDII Code
Code B2105 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
