B2090 Scion Code - Driving Support System Malfunction
Quick Answer
The Seat Belt Control ECU receives collision information from the Driving Support ECU and brake booster with master cylinder (skid control ECU) via CAN communication, and tightens the seat belt by operating the motor inside the front seat outer belt. Common causes include Faulty Seat Belt Control ECU, Seat Belt Control ECU harness is open or shorted, Seat Belt Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2090 Scion indicates Driving Support System Malfunction.
- Common causes
- Common causes include Faulty Seat Belt Control ECU, Seat Belt Control ECU harness is open or shorted, Seat Belt Control ECU circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2090 Scion Description
What are the Possible Causes of the DTC B2090 Scion?
- Faulty Seat Belt Control ECU
- Seat Belt Control ECU harness is open or shorted
- Seat Belt Control ECU circuit poor electrical connection
- Faulty Driving Support ECU
How to Fix the DTC B2090 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2090 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2090 Scion code?
Need more information on how to fix the B2090 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2090 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2090 Scion Code
What does the OBDII code B2090 mean for a Scion?
B2090 indicates a malfunction in the Driving Support System, which includes features like lane assist or adaptive cruise control depending on the model.
What are common symptoms of the B2090 code in a Scion?
Symptoms may include warning lights on the dashboard, reduced functionality of driving support systems, or the systems being completely disabled.
What causes the B2090 code to activate in a Scion?
The code can be triggered by faulty sensors, wiring issues, software glitches, or miscalibration of the driving support system components.
Can a dirty sensor cause the B2090 code in a Scion?
Yes, debris or dirt on sensors such as the radar or camera can obstruct their function and lead to this code.
How can I reset the B2090 code on a Scion?
Clearing the code with an OBDII scanner may work temporarily, but addressing the underlying issue is necessary to prevent recurrence.
Can the B2090 code affect the drivability of a Scion?
While the code itself usually doesn't affect basic driving, it can disable advanced safety features, reducing convenience and safety.
Should I replace the driving support sensors to fix the B2090 code?
Not necessarily. Start with inspecting and cleaning the sensors and wiring. Replace components only if they are confirmed to be faulty.
Is the B2090 code specific to certain Scion models?
Yes, it may appear only in Scion models equipped with advanced driving support systems.
How much does it cost to repair the B2090 code in a Scion?
Repair costs vary depending on the issue, ranging from a simple cleaning (low cost) to sensor replacement or wiring repair (potentially higher).
Can I still drive my Scion with the B2090 code active?
Yes, but advanced safety features may be disabled, so exercise extra caution while driving.
Discuss the causes and fixes for B2090 Scion OBDII Code
Code B2090 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
