B2058 Scion Code - Steering Angle Sensor
Quick Answer
The Seat Belt Control ECU monitors the Steering Angle Sensor. Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2058 Scion indicates Steering Angle Sensor.
- Common causes
- Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2058 Scion Description
What are the Possible Causes of the DTC B2058 Scion?
- Faulty Steering Angle Sensor
- Steering Angle Sensor harness is open or shorted
- Steering Angle Sensor circuit poor electrical connection
- Faulty Seat Belt Control ECU
- Faulty Distance Control ECU
How to Fix the DTC B2058 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2058 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2058 Scion code?
Need more information on how to fix the B2058 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2058 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2058 Scion Code
1. What are the common symptoms of OBDII code B2058 in a Scion related to the Steering Angle Sensor?
The common symptoms include the traction control light or ABS warning light illuminating on the dashboard, loss of stability control, and potential problems with the vehicle's steering responsiveness.
2. What are some possible causes of OBDII code B2058 in a Scion indicating an issue with the Steering Angle Sensor?
Possible causes include a faulty steering angle sensor, damaged wiring or connectors related to the sensor, or issues with the electronic control unit (ECU) receiving inaccurate data from the sensor.
3. How can I diagnose the Steering Angle Sensor issue related to OBDII code B2058 in my Scion?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific code, checking the wiring and connectors for any visible damage, and testing the sensor's output signals using a multimeter or diagnostic tool.
4. Is it safe to drive my Scion with the OBDII code B2058 related to the Steering Angle Sensor issue?
It is not recommended to drive the vehicle with this issue as it may affect the stability control system, potentially compromising the safety and handling of the vehicle.
5. Can I repair the Steering Angle Sensor problem causing OBDII code B2058 in my Scion myself?
Depending on your automotive repair skills, you may be able to replace the steering angle sensor or repair any damaged wiring yourself. However, for accurate diagnosis and complex repairs, it is advisable to seek professional help.
6. How much does it typically cost to repair the Steering Angle Sensor problem triggering OBDII code B2058 in a Scion?
The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor if replacing the sensor or repairing the wiring.
7. Will resetting the OBDII code B2058 related to the Steering Angle Sensor issue make it go away permanently?
Resetting the code may temporarily turn off the warning lights, but if the underlying problem with the steering angle sensor persists, the code is likely to reappear after driving the vehicle for some time.
8. Can a Steering Angle Sensor calibration fix the issue causing OBDII code B2058 in my Scion?
In some cases, recalibrating the steering angle sensor after repairing or replacing it can help resolve the issue and clear the OBDII code B2058. It is recommended to perform calibration following any sensor-related repairs.
9. Are there any preventive measures to avoid encountering OBDII code B2058 due to Steering Angle Sensor problems in my Scion?
Regular maintenance checks, inspecting the sensor and related components for any signs of wear or damage, and addressing any steering-related issues promptly can help prevent the occurrence of such OBDII codes.
10. How long does it take to repair the Steering Angle Sensor issue causing OBDII code B2058 in a Scion?
The repair time can vary depending on the exact cause of the problem and the complexity of the repair. On average, it may take a few hours to a full day for a professional mechanic to diagnose and fix the Steering Angle Sensor issue.
Discuss the causes and fixes for B2058 Scion OBDII Code
Code B2058 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
