B2014 Infiniti Code - Chain Of Steering IMMU
Quick Answer
The Body Control Module (BCM) performs the ID verification with the steering lock unit to release the steering. Common causes include Faulty Steering Wheel Lock Unit, Steering Wheel Lock Unit harness is open or shorted, Steering Wheel Lock Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2014 Infiniti indicates Chain Of Steering IMMU.
- Common causes
- Common causes include Faulty Steering Wheel Lock Unit, Steering Wheel Lock Unit harness is open or shorted, Steering Wheel Lock Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2014 Infiniti Description
What are the Possible Causes of the DTC B2014 Infiniti?
- Faulty Steering Wheel Lock Unit
- Steering Wheel Lock Unit harness is open or shorted
- Steering Wheel Lock Unit circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2014 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2014 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2014 Infiniti code?
Need more information on how to fix the B2014 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2014 Infiniti code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2014 Infiniti Code
1. What are the common symptoms of OBDII code B2014 in an Infiniti related to the Chain of Steering IMMU?
The common symptoms include issues with the steering column lock not functioning properly, leading to difficulty starting the vehicle.
2. What could be the possible causes triggering OBDII code B2014 for the Chain of Steering IMMU in an Infiniti?
The code B2014 can be triggered by a faulty steering lock unit, a malfunction in the steering column, or wiring issues in the steering lock system.
3. How can I diagnose the OBDII code B2014 in my Infiniti related to the Chain of Steering IMMU?
Diagnosing the code B2014 involves checking the steering lock assembly for any visible damage, testing the electrical connections, and using a diagnostic scanner to read the error codes and identify the specific issue.
4. Can I drive my Infiniti with the OBDII code B2014 for the Chain of Steering IMMU?
It is not recommended to drive the vehicle with the code B2014 as it may lead to potential steering lock failures and difficulty starting the car, posing a safety risk.
5. What are some repair tips for fixing the OBDII code B2014 in an Infiniti related to the Chain of Steering IMMU?
Repair tips include checking and replacing any damaged wiring, repairing or replacing the steering lock unit, and clearing the error codes with a diagnostic tool after the repair.
6. How much does it typically cost to repair the OBDII code B2014 related to the Chain of Steering IMMU in an Infiniti?
The cost of repairing the OBDII code B2014 can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
7. Can resetting the OBDII code B2014 related to the Chain of Steering IMMU in my Infiniti solve the issue temporarily?
Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the code to reappear. It is essential to diagnose and repair the problem to prevent future occurrences.
8. Is the OBDII code B2014 related to the Chain of Steering IMMU a common problem in Infiniti vehicles?
The OBDII code B2014 related to the Chain of Steering IMMU is not as common as some other codes, but it can occur in certain Infiniti models due to issues with the steering lock system.
9. Can a DIY enthusiast repair the OBDII code B2014 related to the Chain of Steering IMMU in an Infiniti?
While some DIY enthusiasts may be able to diagnose and repair simple issues causing the code B2014, it is recommended to consult a professional mechanic for complex steering lock system problems.
10. Are there any preventative maintenance steps I can take to avoid triggering the OBDII code B2014 for the Chain of Steering IMMU in my Infiniti?
Regularly inspecting the steering lock system, ensuring proper maintenance of the steering column components, and addressing any warning signs promptly can help prevent triggering the OBDII code B2014.
Discuss the causes and fixes for B2014 Infiniti OBDII Code
-
Hi. I have a 2010 Infiniti FX35. Never had any issues with it til now. It won't start. It wouldn't turn over, no clicking, no dash lights came on, no engine light came on...nothing. I noticed that when I locked the car back, the security system did not beep, but the doors did lock. The next day, when I unlocked the car and then locked it back, the security system beeped as normal, so I tried starting the car, and it started up with no problem. The only other problem I had starting the car was sometimes when I start it if I don't give it a little gas it will shut off. I took it to Infiniti and they diagnosed a B2014 code indicating that my steering lock assembly needed to be replaced. They said something about the key is not being read by the computer, hence the car not starting. Does this sound right? Thanks
-
Does this sound right?
No. If you had a problem with the key, the dash lights would turn ON, but the engine will not start. At the dealer, we had some problems with the negative battery on the FX. The negative cable completes the circuit by connecting one end to the battery negative terminal and the other end to the vehicle chassis; the connection sometimes will get rusted and makes a poor connection. Remove the bolt that holds the negative cable to the chassis and then clean the cable and the chassis threads. Also, make sure the positive cable is tight and battery fully charge.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
