B1991 Chrysler Code - Right Power Sliding Door Sensor Supply Circuit Low
Quick Answer
The Power Sliding Door Module monitors the Right Power Sliding Door Sensor Supply Circuit. Common causes include Faulty Right Power Sliding Door Sensor, Right Power Sliding Door Sensor harness is open or shorted, Right Power Sliding Door Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1991 Chrysler indicates Right Power Sliding Door Sensor Supply Circuit Low.
- Common causes
- Common causes include Faulty Right Power Sliding Door Sensor, Right Power Sliding Door Sensor harness is open or shorted, Right Power Sliding Door Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1991 Chrysler Description
What are the Possible Causes of the DTC B1991 Chrysler?
- Faulty Right Power Sliding Door Sensor
- Right Power Sliding Door Sensor harness is open or shorted
- Right Power Sliding Door Sensor circuit poor electrical connection
- Faulty Power Sliding Door Module
How to Fix the DTC B1991 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1991 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1991 Chrysler code?
Need more information on how to fix the B1991 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1991 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1991 Chrysler Code
1. What are common symptoms of OBDII code B1991 in a Chrysler related to the Right Power Sliding Door Sensor Supply Circuit Low?
- Common symptoms include the right power sliding door not working properly, the door not opening or closing smoothly, and the door getting stuck intermittently.
2. What are the possible causes of the Right Power Sliding Door Sensor Supply Circuit Low code (B1991) in a Chrysler?
- Possible causes may include a faulty sliding door sensor, damaged wiring or connectors in the sensor circuit, or a low voltage supply issue to the sensor.
3. How can I diagnose the issue causing the B1991 code on the Right Power Sliding Door Sensor Supply Circuit Low in my Chrysler?
- You can start by checking the wiring and connectors for any visible damage, testing the voltage supply to the sensor, and using a scan tool to monitor the sensor's operation.
4. Is it safe to continue using the power sliding door if the B1991 code is triggered in my Chrysler?
- It is not recommended to continue using the power sliding door if the code is triggered, as it may lead to further damage or safety issues. It's best to address the problem promptly.
5. Can I reset the B1991 code related to the Right Power Sliding Door Sensor Supply Circuit Low in my Chrysler without fixing the underlying issue?
- While you can clear the code temporarily with a scan tool, it will likely reappear until the root cause is addressed. It's essential to diagnose and repair the problem to prevent future issues.
6. Are there any DIY repair tips for fixing the Right Power Sliding Door Sensor Supply Circuit Low code (B1991) in a Chrysler?
- DIY repair tips include checking and repairing any damaged wiring or connectors, ensuring the sensor is securely mounted and functioning correctly, and testing the voltage supply to the sensor.
7. How much does it typically cost to repair the B1991 code related to the Right Power Sliding Door Sensor Supply Circuit Low in a Chrysler?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the sensor, repairing wiring, or addressing voltage supply problems. Costs can range from a few hundred to over a thousand dollars.
8. Can a mechanic easily fix the Right Power Sliding Door Sensor Supply Circuit Low code (B1991) in my Chrysler?
- A qualified mechanic with experience in diagnosing and repairing electrical issues in Chrysler vehicles should be able to address the B1991 code effectively. It's recommended to seek professional help for a thorough repair.
9. Will ignoring the B1991 code related to the Right Power Sliding Door Sensor Supply Circuit Low cause any long-term damage to my Chrysler?
- Ignoring the B1991 code can lead to further issues with the power sliding door, potential safety hazards, and increased repair costs. It's best to address the problem promptly to prevent long-term damage.
10. How long does it typically take to repair the B1991 code in a Chrysler's Right Power Sliding Door Sensor Supply Circuit Low?
- The repair time can vary based on the exact cause of the issue and the complexity of the repair. In general, it may take a few hours to a full day to diagnose and fix the problem with the power sliding door sensor circuit.
Discuss the causes and fixes for B1991 Chrysler OBDII Code
Code B1991 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
