B1956 Dodge Code - Power Liftgate Latch Release Excessive Time
Quick Answer
The latch motor should perform its operation within four seconds. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1956 Dodge indicates Power Liftgate Latch Release Excessive Time.
- Common causes
- Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1956 Dodge Description
What are the Possible Causes of the DTC B1956 Dodge?
- Binding Liftgate
- Faulty Latch Assembly
- Latch Assembly harness is open or shorted
- Latch Assembly circuit poor electrical connection
- Faulty Power Liftgate Module
How to Fix the DTC B1956 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1956 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1956 Dodge code?
Need more information on how to fix the B1956 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1956 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1956 Dodge Code
1. What are the common symptoms of OBDII code B1956 in a Dodge related to the Power Liftgate Latch Release Excessive Time?
- Common symptoms include difficulty opening or closing the power liftgate, intermittent operation, and a noticeable delay in the latch release mechanism.
2. What could cause OBDII code B1956 to trigger in a Dodge Power Liftgate system?
- The code B1956 may be triggered due to a faulty power liftgate latch release actuator, wiring issues, a malfunctioning control module, or a mechanical problem within the liftgate mechanism.
3. How can I diagnose the root cause of OBDII code B1956 in my Dodge's Power Liftgate system?
- To diagnose the issue, you can use a scan tool to retrieve the specific fault codes, visually inspect the wiring and connectors for any damage, test the power liftgate latch release actuator for proper function, and check the control module for any signs of failure.
4. Are there any simple repair tips for fixing OBDII code B1956 related to the Power Liftgate Latch Release Excessive Time in a Dodge?
- Some simple repair tips include checking and repairing any damaged wiring, ensuring proper power supply to the actuator, cleaning and lubricating the latch mechanism, and resetting the control module by disconnecting the battery for a few minutes.
5. Can I continue to use my Dodge with OBDII code B1956 related to the Power Liftgate Latch Release Excessive Time without immediate repair?
- While it may be possible to continue using the vehicle with the code present, it is recommended to address the issue promptly to avoid potential safety hazards and further damage to the power liftgate system.
6. Is it necessary to visit a dealership or mechanic to repair OBDII code B1956 in a Dodge Power Liftgate system?
- Depending on your level of automotive knowledge and experience, you may be able to diagnose and repair the issue yourself. However, if you are unsure or unable to resolve the problem, it is advisable to seek professional help from a dealership or qualified mechanic.
7. How much can I expect to pay for repairing OBDII code B1956 in a Dodge Power Liftgate system?
- The cost of repairing OBDII code B1956 can vary depending on the root cause of the issue, labor rates in your area, and the cost of parts needed for the repair. It is recommended to obtain quotes from different repair shops to compare prices.
8. Are there any recalls or technical service bulletins related to OBDII code B1956 in Dodge vehicles?
- It's advisable to check with the Dodge dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to OBDII code B1956 in your specific Dodge model.
9. Can I prevent OBDII code B1956 from occurring in my Dodge Power Liftgate system in the future?
- To prevent OBDII code B1956, you can perform regular maintenance on the power liftgate system, avoid overloading the liftgate, ensure proper lubrication of moving parts, and address any issues promptly to prevent further damage.
10. Is OBDII code B1956 a common issue in Dodge vehicles with a Power Liftgate system?
- While OBDII code B1956 related to the Power Liftgate Latch Release Excessive Time is not extremely common, it can occur in Dodge vehicles with power liftgate systems, especially in older models or those with high mileage.
Discuss the causes and fixes for B1956 Dodge OBDII Code
Code B1956 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
