AutoCodes – Jeep – B1955 Jeep

B1955 Jeep Code - Power Liftgate Latch Release Overcurrent

Quick Answer

The Power Liftgate Module monitors the Power Liftgate Latch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1955 Jeep indicates Power Liftgate Latch Release Overcurrent.
Common causes: Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 667

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1955 Jeep Description

The Power Liftgate Module monitors the Power Liftgate Latch. The Power Liftgate Module sets the OBDII code when the latch cinch operation is longer than 4 seconds, and the latch motor stall current is less than 12 amps has been detected for over 500 ms with no ratchet or secondary switch transition.

OBDII Code B1955 Jeep - Power Liftgate Latch Release Overcurrent - AutoCodes.com — B1955 Jeep Code - Power Liftgate Latch Release Overcurrent

What does this mean?

What are the Possible Causes of the DTC B1955 Jeep?

Binding Liftgate
Faulty Latch Assembly
Latch Assembly harness is open or shorted
Latch Assembly circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B1955 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1955 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1955 Jeep code?

Need more information on how to fix the B1955 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1955 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1955 Jeep Code

1. What are the common symptoms of OBDII code B1955 in a Jeep related to the power liftgate latch release overcurrent issue?

- Common symptoms include difficulty opening or closing the power liftgate, intermittent operation of the latch release, or a warning light on the dashboard.

2. What are the possible causes of OBDII code B1955 in a Jeep indicating a power liftgate latch release overcurrent problem?

- Potential causes may include a faulty power liftgate latch release mechanism, damaged wiring or connectors, or a malfunctioning control module.

3. How can I diagnose the OBDII code B1955 in my Jeep related to the power liftgate latch release overcurrent issue?

- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the power liftgate latch components for damage, and testing the electrical connections for proper voltage and continuity.

4. What are the recommended repair options for resolving OBDII code B1955 in a Jeep associated with the power liftgate latch release overcurrent issue?

- Repair options may include replacing the power liftgate latch assembly, repairing damaged wiring or connectors, or reprogramming the control module if necessary.

5. Is it safe to continue driving my Jeep with OBDII code B1955 indicating a power liftgate latch release overcurrent fault?

- It is advisable to address the issue promptly to avoid potential safety hazards or further damage to the power liftgate system.

6. Can a DIY enthusiast fix OBDII code B1955 in a Jeep related to the power liftgate latch release overcurrent problem?

- Depending on the skill level and experience, some DIY enthusiasts may be able to diagnose and repair the issue themselves, but it is recommended to consult a professional if unsure.

7. How much does it typically cost to repair OBDII code B1955 in a Jeep caused by the power liftgate latch release overcurrent issue?

- Repair costs can vary depending on the exact cause of the problem, but they may range from a few hundred to a thousand dollars, including parts and labor.

8. Are there any preventative measures I can take to avoid encountering OBDII code B1955 in my Jeep related to the power liftgate latch release overcurrent issue in the future?

- Regular maintenance of the power liftgate system, checking for any signs of wear or damage, and addressing any issues promptly can help prevent this code from reoccurring.

9. How long does it typically take to repair OBDII code B1955 in a Jeep associated with the power liftgate latch release overcurrent fault?

- The repair time can vary based on the exact cause of the issue and the availability of parts, but it may take a few hours to a full day to complete the repair.

10. Can resetting the OBDII system clear the B1955 code related to the power liftgate latch release overcurrent in a Jeep?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the overcurrent problem is not addressed, the code is likely to reappear.