AutoCodes – Chrysler – B1955 Chrysler

B1955 Chrysler Code - Power Liftgate Latch Release Overcurrent

Quick Answer

The Power Liftgate Module monitors the Power Liftgate Latch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1955 Chrysler indicates Power Liftgate Latch Release Overcurrent.
Common causes: Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,529

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1955 Chrysler Description

The Power Liftgate Module monitors the Power Liftgate Latch. The Power Liftgate Module sets the OBDII code when the latch cinch operation is longer than 4 seconds, and the latch motor stall current is less than 12 amps has been detected for over 500 ms with no ratchet or secondary switch transition.

OBDII Code B1955 Chrysler - Power Liftgate Latch Release Overcurrent - AutoCodes.com — B1955 Chrysler Code - Power Liftgate Latch Release Overcurrent

What does this mean?

What are the Possible Causes of the DTC B1955 Chrysler?

Binding Liftgate
Faulty Latch Assembly
Latch Assembly harness is open or shorted
Latch Assembly circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B1955 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1955 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1955 Chrysler code?

Need more information on how to fix the B1955 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1955 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1955 Chrysler Code

1. What are the common symptoms of OBDII code B1955 (Chrysler) related to the Power Liftgate Latch Release Overcurrent?

The common symptoms include the power liftgate failing to open or close properly, intermittent issues with the liftgate operation, and possible warning lights on the dashboard.

2. What are the potential causes of OBDII code B1955 (Chrysler) indicating Power Liftgate Latch Release Overcurrent?

Possible causes can include a faulty power liftgate latch release mechanism, damaged wiring or connectors in the liftgate system, or an issue with the liftgate control module.

3. How can I diagnose OBDII code B1955 (Chrysler) for Power Liftgate Latch Release Overcurrent?

Diagnosis typically involves using a scan tool to read the code, checking the power liftgate system for any visible damage or loose connections, and conducting electrical tests on the components involved.

4. What are some DIY repair tips for addressing OBDII code B1955 (Chrysler) related to Power Liftgate Latch Release Overcurrent?

DIY repairs can include checking and repairing any damaged wiring, ensuring proper connections in the liftgate system, and, if necessary, replacing the faulty latch release mechanism.

5. Is it safe to continue driving with OBDII code B1955 (Chrysler) triggered by Power Liftgate Latch Release Overcurrent?

It is not recommended to continue driving with this code triggered, as it can lead to further issues with the power liftgate operation and potentially compromise vehicle safety.

6. Can resetting the OBDII code B1955 (Chrysler) related to Power Liftgate Latch Release Overcurrent resolve the issue temporarily?

Resetting the code may temporarily clear the warning light, but if the underlying issue causing the overcurrent is not addressed, the problem is likely to reoccur.

7. How much does it typically cost to repair OBDII code B1955 (Chrysler) associated with Power Liftgate Latch Release Overcurrent?

The cost of repair can vary depending on the exact cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic fees.

8. Are there any recalls or technical service bulletins (TSBs) related to OBDII code B1955 (Chrysler) and Power Liftgate Latch Release Overcurrent?

It's advisable to check with Chrysler dealerships or online resources for any relevant recalls or TSBs that may address this specific OBDII code and associated problem.

9. Can extreme weather conditions affect the triggering of OBDII code B1955 (Chrysler) for Power Liftgate Latch Release Overcurrent?

Extreme weather conditions, such as extreme cold or heat, can potentially impact the electrical components of the power liftgate system and contribute to the overcurrent issue.

10. How can regular maintenance help prevent OBDII code B1955 (Chrysler) from occurring due to Power Liftgate Latch Release Overcurrent?

Regular maintenance, such as inspecting and cleaning the power liftgate components, checking for any signs of wear or damage, and addressing issues promptly, can help prevent the occurrence of this OBDII code.