B1953 Dodge Code - Power Liftgate Latch Cinch Overcurrent
Quick Answer
The Power Liftgate Module monitors the Power Liftgate Latch Cinch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1953 Dodge indicates Power Liftgate Latch Cinch Overcurrent.
- Common causes
- Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1953 Dodge Description
What are the Possible Causes of the DTC B1953 Dodge?
- Binding Liftgate
- Faulty Latch Assembly
- Latch Assembly harness is open or shorted
- Latch Assembly circuit poor electrical connection
- Faulty Power Liftgate Module
How to Fix the DTC B1953 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1953 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1953 Dodge code?
Need more information on how to fix the B1953 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1953 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1953 Dodge Code
What does OBDII code B1953 mean for a Dodge vehicle?
Code B1953 indicates a power liftgate latch cinch overcurrent issue, which means there is an excessive current detected in the liftgate latch motor circuit.
What are common symptoms of the B1953 code?
Common symptoms include the power liftgate not functioning properly, an inability to open or close the liftgate, and the illumination of the check engine light.
What could cause the B1953 code to trigger?
The code can be triggered by a faulty liftgate latch motor, wiring issues such as shorts or open circuits, or problems with the liftgate control module.
How can I diagnose the B1953 code?
To diagnose the B1953 code, inspect the liftgate latch motor and its wiring for damage. Use a multimeter to check for continuity and proper voltage to the motor.
What are some common repairs for the B1953 code?
Common repairs include replacing the liftgate latch motor, repairing any damaged wiring, or replacing the liftgate control module if it is found to be faulty.
Can I drive my Dodge vehicle with the B1953 code?
While you can drive the vehicle, the malfunctioning power liftgate may pose a safety risk, and it's advisable to address the issue to restore full functionality.
Is it necessary to clear the B1953 code after repairs?
Yes, after making the necessary repairs, you should clear the code using an OBDII scanner to reset the vehicle's systems and monitor for any recurrence of the issue.
How much does it typically cost to fix the B1953 code?
Repair costs can vary widely depending on the specific issue, but replacing the liftgate latch motor may range from $100 to $300, including parts and labor.
Can the B1953 code be related to other liftgate issues?
Yes, the B1953 code can sometimes be accompanied by other codes related to the liftgate system, indicating multiple issues that may need to be diagnosed and repaired together.
Discuss the causes and fixes for B1953 Dodge OBDII Code
Code B1953 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
