B1941 2013 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit
Quick Answer
The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1941 2013 Toyota RAV4 indicates Open in Selectable Force Limiter Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1941 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1941 2013 Toyota RAV4?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1941 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1941 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1941 2013 Toyota RAV4 code?
Need more information on how to fix the B1941 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1941 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1941 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1941 in a 2013 Toyota RAV4?
The common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the airbags in case of an accident.
2. What does the OBDII code B1941 "Open in Selectable Force Limiter Squib Right Circuit" mean for a 2013 Toyota RAV4?
This code indicates an issue with the selectable force limiter squib circuit on the right side of the vehicle's airbag system.
3. What are possible causes of OBDII code B1941 in a 2013 Toyota RAV4?
Potential causes include a faulty squib (pyrotechnic) circuit in the airbag system, a poor electrical connection, or damaged wiring.
4. How serious is OBDII code B1941 in a 2013 Toyota RAV4?
This code should be taken seriously as it directly affects the functionality of the airbag system, which is crucial for occupant safety in the event of a collision.
5. Can OBDII code B1941 be repaired at home?
While some basic troubleshooting like checking for loose connections or damaged wiring can be done at home, fixing the underlying issue may require professional diagnosis and repair.
6. How can I diagnose OBDII code B1941 in my 2013 Toyota RAV4?
Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific details of the fault in the airbag system and inspecting the relevant components.
7. Is it safe to drive with OBDII code B1941 present in a 2013 Toyota RAV4?
It is not recommended to drive the vehicle with this code active, as it may compromise the functionality of the airbags in case of an accident.
8. How much does it cost to repair OBDII code B1941 in a 2013 Toyota RAV4?
The cost of repairs can vary depending on the exact cause of the issue, but it may involve replacing components in the airbag system or repairing damaged wiring.
9. Can resetting the OBDII system clear code B1941 in a 2013 Toyota RAV4?
Resetting the OBDII system may temporarily clear the code, but it is likely to reappear if the underlying issue with the airbag system is not addressed.
10. How long does it typically take to repair OBDII code B1941 in a 2013 Toyota RAV4?
The repair time can vary depending on the extent of the issue and the availability of parts, but it may take a few hours to a day to diagnose and fix the problem.
Discuss the causes and fixes for B1941 2013 Toyota RAV4 OBDII Code
Code B1941 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
