AutoCodes – Toyota – B1940 2015 Toyota RAV4

B1940 2015 Toyota RAV4 Code - Short in Selectable Force Limiter Squib Right Circuit

Quick Answer

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1940 2015 Toyota RAV4 indicates Short in Selectable Force Limiter Squib Right Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 348

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1940 2015 Toyota RAV4 Description

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Selectable Force Limiter Squib Right Circuit.

OBDII Code B1940 2015 Toyota RAV4 - Short in Selectable Force Limiter Squib Right Circuit - AutoCodes.com — B1940 2015 Toyota RAV4 Code - Short in Selectable Force Limiter Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1940 2015 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
Front Seat Outer Belt Assembly Right harness is open or shorted
Front Seat Outer Belt Assembly Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1940 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1940 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1940 2015 Toyota RAV4 code?

Need more information on how to fix the B1940 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1940 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1940 2015 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1940 in a 2015 Toyota RAV4?

The common symptoms of OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4 may include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.

2. What could cause OBDII code B1940 in a 2015 Toyota RAV4?

The possible causes of OBDII code B1940 in a 2015 Toyota RAV4 include a short circuit in the selectable force limiter squib right circuit, damaged wiring or connectors, or a faulty squib (airbag) component.

3. How serious is OBDII code B1940 in a 2015 Toyota RAV4?

OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4 is a serious issue as it indicates a potential problem with the vehicle's airbag system, which could compromise safety in the event of a collision.

4. Can OBDII code B1940 be fixed at home?

Fixing OBDII code B1940 in a 2015 Toyota RAV4 may require advanced diagnostic tools and expertise. It is recommended to consult a professional mechanic or authorized service center for proper diagnosis and repair.

5. How much does it cost to repair OBDII code B1940 in a 2015 Toyota RAV4?

The cost of repairing OBDII code B1940 in a 2015 Toyota RAV4 can vary depending on the exact cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain a detailed quote from a certified mechanic.

6. Is it safe to drive with OBDII code B1940 present in a 2015 Toyota RAV4?

It is not recommended to drive the vehicle with OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4, as it indicates a potential fault in the airbag system that could affect its functionality in the event of a collision.

7. How long does it take to repair OBDII code B1940 in a 2015 Toyota RAV4?

The repair time for OBDII code B1940 in a 2015 Toyota RAV4 can vary based on the exact cause of the issue and the availability of parts. It is best to consult with a professional mechanic for an accurate estimate.

8. Can OBDII code B1940 affect other systems in a 2015 Toyota RAV4?

While OBDII code B1940 specifically relates to a fault in the airbag system of a 2015 Toyota RAV4, it is essential to address this issue promptly to ensure the overall safety and functionality of the vehicle's systems.

9. Are there any recalls related to OBDII code B1940 in a 2015 Toyota RAV4?

It is advisable to check with the manufacturer or authorized service center for any recalls or technical service bulletins related to OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) in a 2015 Toyota RAV4.

10. Can resetting the OBDII system clear code B1940 in a 2015 Toyota RAV4?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing OBDII code B1940 (Short in Selectable Force Limiter Squib Right Circuit) is not addressed, the code is likely to reappear. It is crucial to diagnose and repair the root cause of the problem.