B1925 Toyota Code - Short In Rear Pretensioner Squib LH Circuit
Quick Answer
The Rear Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and the Seat Outer Belt Assembly Left (LH). Common causes include Faulty Seat Outer Belt Assembly Left (LH) (Rear Pretensioner Squib LH), Seat Outer Belt Assembly Left (LH) harness is open or shorted, Seat Outer Belt Assembly Left (LH) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1925 Toyota indicates Short In Rear Pretensioner Squib LH Circuit.
- Common causes
- Common causes include Faulty Seat Outer Belt Assembly Left (LH) (Rear Pretensioner Squib LH), Seat Outer Belt Assembly Left (LH) harness is open or shorted, Seat Outer Belt Assembly Left (LH) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1925 Toyota Description
What are the Possible Causes of the DTC B1925 Toyota?
- Faulty Seat Outer Belt Assembly Left (LH) (Rear Pretensioner Squib LH)
- Seat Outer Belt Assembly Left (LH) harness is open or shorted
- Seat Outer Belt Assembly Left (LH) circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1925 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1925 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1925 Toyota code?
Need more information on how to fix the B1925 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1925 Toyota code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1925 Toyota Code
1. What are the common symptoms of OBDII code B1925 in a Toyota related to a short in the rear pretensioner squib LH circuit?
- The common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the seatbelt pretensioner in the event of a collision.
2. What is the most likely cause of OBDII code B1925 in a Toyota indicating a short in the rear pretensioner squib LH circuit?
- The most likely cause is a wiring issue, such as a short circuit or damage to the wiring harness connected to the rear pretensioner squib LH.
3. How can I diagnose the problem associated with OBDII code B1925 in my Toyota?
- To diagnose the issue, a thorough inspection of the wiring harness, connectors, and components related to the rear pretensioner squib LH circuit is recommended. Using a multimeter to test for continuity and shorts can help pinpoint the problem.
4. Is it safe to drive my Toyota with OBDII code B1925 indicating a short in the rear pretensioner squib LH circuit?
- It is not advisable to drive the vehicle with this issue as the seatbelt pretensioner may not function correctly in the event of a collision, compromising safety.
5. Can I repair OBDII code B1925 in my Toyota on my own?
- While some basic troubleshooting steps can be taken, repairing OBDII code B1925 related to a short in the rear pretensioner squib LH circuit usually requires professional intervention due to safety concerns.
6. Are there any quick fixes or temporary solutions for OBDII code B1925 in a Toyota?
- Quick fixes or temporary solutions are not recommended for this code, as it involves the safety system of the vehicle. It is essential to address the root cause promptly.
7. How much does it typically cost to repair OBDII code B1925 in a Toyota at a dealership or repair shop?
- The cost of repair can vary depending on the extent of the wiring damage and the labor required. It is advisable to consult a dealership or repair shop for an accurate estimate.
8. Can resetting the OBDII code B1925 in my Toyota make the problem go away?
- Simply resetting the code will not fix the underlying issue causing OBDII code B1925. It is crucial to diagnose and repair the problem to ensure the safety systems function properly.
9. Will OBDII code B1925 in a Toyota affect the overall performance of the vehicle?
- This code specifically relates to the safety system of the vehicle, so while it may not impact performance, it can compromise occupant safety in the event of a collision.
10. How can I prevent OBDII code B1925 from occurring in my Toyota in the future?
- Regular maintenance and inspection of the vehicle's wiring harnesses and safety systems can help prevent issues like OBDII code B1925 from occurring. If any warning lights appear, address them promptly.
Discuss the causes and fixes for B1925 Toyota OBDII Code
-
-
The B1925 code on a Toyota Land Cruiser indicates an issue with the driver's seat position sensor circuit. This sensor monitors seat position for airbag deployment. Causes may include a faulty sensor, damaged wiring, or a poor connection. Diagnosing involves checking sensor wiring, connections, and testing the sensor. Repairs may include fixing wiring or replacing the sensor if necessary.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
