AutoCodes – Toyota – B1905 2013 Toyota RAV4

B1905 2013 Toyota RAV4 Code - Short in Front Pretensioner Squib Left Circuit

Quick Answer

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1905 2013 Toyota RAV4 indicates Short in Front Pretensioner Squib Left Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 350

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1905 2013 Toyota RAV4 Description

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Pretensioner Squib Left Circuit.

OBDII Code B1905 2013 Toyota RAV4 - Short in Front Pretensioner Squib Left Circuit - AutoCodes.com — B1905 2013 Toyota RAV4 Code - Short in Front Pretensioner Squib Left Circuit

What does this mean?

What are the Possible Causes of the DTC B1905 2013 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left)
Front Seat Outer Belt Assembly Left is open or shorted
Front Seat Outer Belt Assembly Left poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1905 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1905 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1905 2013 Toyota RAV4 code?

Need more information on how to fix the B1905 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1905 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1905 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1905 in a 2013 Toyota RAV4?

The common symptoms of OBDII code B1905, indicating a short in the Front Pretensioner Squib Left Circuit, may include an illuminated airbag warning light on the dashboard and potential non-deployment of the seatbelt pretensioner in the event of a collision.

2. What could cause the OBDII code B1905 to appear in a 2013 Toyota RAV4?

The OBDII code B1905 in a 2013 Toyota RAV4 is typically triggered by a short circuit in the Front Pretensioner Squib Left Circuit, which could be caused by damaged wiring, a faulty pretensioner squib, or a loose connection.

3. How can I diagnose the OBDII code B1905 in my 2013 Toyota RAV4?

Diagnosing the OBDII code B1905 involves using a compatible OBDII scanner to retrieve the fault code information, inspecting the wiring and connections related to the Front Pretensioner Squib Left Circuit, and testing the pretensioner squib for proper functionality.

4. Is it safe to drive my 2013 Toyota RAV4 with the OBDII code B1905 present?

It is not recommended to drive your 2013 Toyota RAV4 with the OBDII code B1905 present, as it indicates a potential issue with the seatbelt pretensioner system, which is designed to enhance safety in the event of a collision.

5. How can I repair the Front Pretensioner Squib Left Circuit issue causing the OBDII code B1905 in my 2013 Toyota RAV4?

Repairing the Front Pretensioner Squib Left Circuit issue may involve repairing or replacing damaged wiring, addressing any loose connections, or replacing the faulty pretensioner squib component as needed.

6. Can I reset the OBDII code B1905 in my 2013 Toyota RAV4 myself?

While you can clear the OBDII code B1905 using an OBDII scanner, it is important to address the underlying issue causing the fault code before resetting it to ensure the safety systems are functioning properly.

7. How much does it cost to repair the OBDII code B1905 in a 2013 Toyota RAV4?

The cost of repairing the OBDII code B1905 in a 2013 Toyota RAV4 can vary depending on the exact cause of the issue, the extent of the repairs needed, and whether any components require replacement. It is recommended to consult with a professional mechanic for an accurate estimate.

8. Are there any recalls or technical service bulletins related to the OBDII code B1905 in a 2013 Toyota RAV4?

It is advisable to check with Toyota or authorized dealerships for any recalls or technical service bulletins related to the OBDII code B1905 in a 2013 Toyota RAV4, as manufacturers may provide guidance or assistance for such issues.

9. How can I prevent the OBDII code B1905 from recurring in my 2013 Toyota RAV4?

To prevent the OBDII code B1905 from recurring, it is essential to ensure regular maintenance of the seatbelt pretensioner system, inspect wiring and connections periodically for damage or wear, and address any issues promptly to maintain safety systems' functionality.

10. Can I drive my 2013 Toyota RAV4 without fixing the OBDII code B1905?

Driving your 2013 Toyota RAV4 without fixing the OBDII code B1905, indicating a Front Pretensioner Squib Left Circuit issue, is not recommended as it may compromise the effectiveness of the seatbelt pretensioner system in the event of a collision.