B1904 Code - Air Bag Crash Sensor 2 Feed/Return Circuit Failure
Quick Answer
The Air Bag Control Module monitors the Air Bag Crash Sensor 2. Common causes include Faulty Air Bag Crash Sensor 2, Air Bag Crash Sensor 2 harness is open or shorted, Air Bag Crash Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1904 indicates Air Bag Crash Sensor 2 Feed/Return Circuit Failure.
- Common causes
- Common causes include Faulty Air Bag Crash Sensor 2, Air Bag Crash Sensor 2 harness is open or shorted, Air Bag Crash Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1904 Description
What are the Possible Causes of the DTC B1904?
- Faulty Air Bag Crash Sensor 2
- Air Bag Crash Sensor 2 harness is open or shorted
- Air Bag Crash Sensor 2 circuit poor electrical connection
- Faulty Air Bag Control Module
How to Fix the DTC B1904?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1904 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1904 code?
Need more information on how to fix the B1904 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1904 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1904 Code
1. What are the common symptoms of OBDII code B1904 (Air Bag Crash Sensor 2 Feed/Return Circuit Failure)?
The common symptoms of this code may include the airbag warning light illuminating on the dashboard, the airbags may not deploy in the event of a crash, and diagnostic trouble codes related to the airbag system may be stored.
2. What can cause OBDII code B1904 to trigger?
This code is typically triggered by a malfunction in the air bag crash sensor 2 feed/return circuit, which can be caused by wiring issues, a faulty sensor, or a poor connection in the circuit.
3. How serious is OBDII code B1904?
OBDII code B1904 is a serious issue as it indicates a failure in the air bag crash sensor circuit. If this code is present, it is crucial to address the issue promptly to ensure the airbag system functions properly in the event of a collision.
4. How can I diagnose OBDII code B1904?
Diagnosing this code usually involves using a scan tool to retrieve the specific code, inspecting the wiring and connections related to the air bag crash sensor 2, and testing the sensor itself for proper functionality.
5. Can I drive with OBDII code B1904 present?
It is not recommended to drive with OBDII code B1904 present because it indicates a potential issue with the airbag system, which is a crucial safety feature in your vehicle. It is best to address the problem as soon as possible.
6. How can I repair OBDII code B1904?
Repairing this code involves identifying the root cause of the issue, which may be a faulty sensor, damaged wiring, or a poor connection. Once identified, the necessary repairs or replacements can be made to resolve the problem.
7. Are there any DIY tips for fixing OBDII code B1904?
While it is possible to diagnose the code yourself, repairing OBDII code B1904 may require specialized tools and expertise. It is recommended to seek the assistance of a professional mechanic to ensure the issue is properly addressed.
8. How much does it cost to fix OBDII code B1904?
The cost of fixing OBDII code B1904 can vary depending on the root cause of the issue, the extent of the repairs needed, and the labor rates in your area. It is advisable to obtain quotes from different repair shops to compare prices.
9. Can resetting the OBDII system clear code B1904?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing OBDII code B1904 is not addressed, the code is likely to return. It is important to diagnose and fix the root cause of the problem.
10. Is OBDII code B1904 a common issue in vehicles?
While not as common as some other OBDII codes, B1904 can occur in vehicles with airbag crash sensor systems. Proper maintenance and care of the airbag system can help prevent this code from triggering.
Discuss the causes and fixes for B1904 OBDII Code
Code B1904 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
